diff options
Diffstat (limited to 'arch/arm/mach-omap1/board-voiceblue.c')
| -rw-r--r-- | arch/arm/mach-omap1/board-voiceblue.c | 107 |
1 files changed, 60 insertions, 47 deletions
diff --git a/arch/arm/mach-omap1/board-voiceblue.c b/arch/arm/mach-omap1/board-voiceblue.c index 815a69ce821..bdc0ac8dc21 100644 --- a/arch/arm/mach-omap1/board-voiceblue.c +++ b/arch/arm/mach-omap1/board-voiceblue.c @@ -26,10 +26,12 @@ #include <linux/smc91x.h> #include <mach/hardware.h> +#include <mach/system.h> #include <asm/mach-types.h> #include <asm/mach/arch.h> #include <asm/mach/map.h> +#include <plat/board-voiceblue.h> #include <plat/common.h> #include <mach/gpio.h> #include <plat/flash.h> @@ -163,52 +165,6 @@ static void __init voiceblue_init_irq(void) omap_init_irq(); } -static void __init voiceblue_init(void) -{ - /* mux pins for uarts */ - omap_cfg_reg(UART1_TX); - omap_cfg_reg(UART1_RTS); - omap_cfg_reg(UART2_TX); - omap_cfg_reg(UART2_RTS); - omap_cfg_reg(UART3_TX); - omap_cfg_reg(UART3_RX); - - /* Watchdog */ - gpio_request(0, "Watchdog"); - /* smc91x reset */ - gpio_request(7, "SMC91x reset"); - gpio_direction_output(7, 1); - udelay(2); /* wait at least 100ns */ - gpio_set_value(7, 0); - mdelay(50); /* 50ms until PHY ready */ - /* smc91x interrupt pin */ - gpio_request(8, "SMC91x irq"); - /* 16C554 reset*/ - gpio_request(6, "16C554 reset"); - gpio_direction_output(6, 0); - /* 16C554 interrupt pins */ - gpio_request(12, "16C554 irq"); - gpio_request(13, "16C554 irq"); - gpio_request(14, "16C554 irq"); - gpio_request(15, "16C554 irq"); - set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); - set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); - - platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); - omap_board_config = voiceblue_config; - omap_board_config_size = ARRAY_SIZE(voiceblue_config); - omap_serial_init(); - omap1_usb_init(&voiceblue_usb_config); - omap_register_i2c_bus(1, 100, NULL, 0); - - /* There is a good chance board is going up, so enable power LED - * (it is connected through invertor) */ - omap_writeb(0x00, OMAP_LPG1_LCR); - omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ -} - static void __init voiceblue_map_io(void) { omap1_map_common_io(); @@ -275,8 +231,17 @@ void voiceblue_wdt_ping(void) gpio_set_value(0, wdt_gpio_state); } -void voiceblue_reset(void) +static void voiceblue_reset(char mode, const char *cmd) { + /* + * Workaround for 5912/1611b bug mentioned in sprz209d.pdf p. 28 + * "Global Software Reset Affects Traffic Controller Frequency". + */ + if (cpu_is_omap5912()) { + omap_writew(omap_readw(DPLL_CTL) & ~(1 << 4), DPLL_CTL); + omap_writew(0x8, ARM_RSTCT1); + } + set_bit(MACHINE_REBOOT, &machine_state); voiceblue_wdt_enable(); while (1) ; @@ -286,6 +251,54 @@ EXPORT_SYMBOL(voiceblue_wdt_enable); EXPORT_SYMBOL(voiceblue_wdt_disable); EXPORT_SYMBOL(voiceblue_wdt_ping); +static void __init voiceblue_init(void) +{ + /* mux pins for uarts */ + omap_cfg_reg(UART1_TX); + omap_cfg_reg(UART1_RTS); + omap_cfg_reg(UART2_TX); + omap_cfg_reg(UART2_RTS); + omap_cfg_reg(UART3_TX); + omap_cfg_reg(UART3_RX); + + /* Watchdog */ + gpio_request(0, "Watchdog"); + /* smc91x reset */ + gpio_request(7, "SMC91x reset"); + gpio_direction_output(7, 1); + udelay(2); /* wait at least 100ns */ + gpio_set_value(7, 0); + mdelay(50); /* 50ms until PHY ready */ + /* smc91x interrupt pin */ + gpio_request(8, "SMC91x irq"); + /* 16C554 reset*/ + gpio_request(6, "16C554 reset"); + gpio_direction_output(6, 0); + /* 16C554 interrupt pins */ + gpio_request(12, "16C554 irq"); + gpio_request(13, "16C554 irq"); + gpio_request(14, "16C554 irq"); + gpio_request(15, "16C554 irq"); + set_irq_type(gpio_to_irq(12), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(13), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(14), IRQ_TYPE_EDGE_RISING); + set_irq_type(gpio_to_irq(15), IRQ_TYPE_EDGE_RISING); + + platform_add_devices(voiceblue_devices, ARRAY_SIZE(voiceblue_devices)); + omap_board_config = voiceblue_config; + omap_board_config_size = ARRAY_SIZE(voiceblue_config); + omap_serial_init(); + omap1_usb_init(&voiceblue_usb_config); + omap_register_i2c_bus(1, 100, NULL, 0); + + /* There is a good chance board is going up, so enable power LED + * (it is connected through invertor) */ + omap_writeb(0x00, OMAP_LPG1_LCR); + omap_writeb(0x00, OMAP_LPG1_PMR); /* Disable clock */ + + arch_reset = voiceblue_reset; +} + MACHINE_START(VOICEBLUE, "VoiceBlue OMAP5910") /* Maintainer: Ladislav Michl <michl@2n.cz> */ .boot_params = 0x10000100, |