diff options
Diffstat (limited to 'arch/arm/mach-exynos/include')
| -rw-r--r-- | arch/arm/mach-exynos/include/mach/entry-macro.S | 75 |
1 files changed, 0 insertions, 75 deletions
diff --git a/arch/arm/mach-exynos/include/mach/entry-macro.S b/arch/arm/mach-exynos/include/mach/entry-macro.S index f5e9fd8e37b..3ba4f547534 100644 --- a/arch/arm/mach-exynos/include/mach/entry-macro.S +++ b/arch/arm/mach-exynos/include/mach/entry-macro.S @@ -9,83 +9,8 @@ * warranty of any kind, whether express or implied. */ -#include <mach/hardware.h> -#include <mach/map.h> -#include <asm/hardware/gic.h> - .macro disable_fiq .endm - .macro get_irqnr_preamble, base, tmp - mov \tmp, #0 - - mrc p15, 0, \base, c0, c0, 5 - and \base, \base, #3 - cmp \base, #0 - beq 1f - - ldr \tmp, =gic_bank_offset - ldr \tmp, [\tmp] - cmp \base, #1 - beq 1f - - cmp \base, #2 - addeq \tmp, \tmp, \tmp - addne \tmp, \tmp, \tmp, LSL #1 - -1: ldr \base, =gic_cpu_base_addr - ldr \base, [\base] - add \base, \base, \tmp - .endm - .macro arch_ret_to_user, tmp1, tmp2 .endm - - /* - * The interrupt numbering scheme is defined in the - * interrupt controller spec. To wit: - * - * Interrupts 0-15 are IPI - * 16-28 are reserved - * 29-31 are local. We allow 30 to be used for the watchdog. - * 32-1020 are global - * 1021-1022 are reserved - * 1023 is "spurious" (no interrupt) - * - * For now, we ignore all local interrupts so only return an interrupt if it's - * between 30 and 1020. The test_for_ipi routine below will pick up on IPIs. - * - * A simple read from the controller will tell us the number of the highest - * priority enabled interrupt. We then just need to check whether it is in the - * valid range for an IRQ (30-1020 inclusive). - */ - - .macro get_irqnr_and_base, irqnr, irqstat, base, tmp - - ldr \irqstat, [\base, #GIC_CPU_INTACK] /* bits 12-10 = src CPU, 9-0 = int # */ - - ldr \tmp, =1021 - - bic \irqnr, \irqstat, #0x1c00 - - cmp \irqnr, #15 - cmpcc \irqnr, \irqnr - cmpne \irqnr, \tmp - cmpcs \irqnr, \irqnr - addne \irqnr, \irqnr, #32 - - .endm - - /* We assume that irqstat (the raw value of the IRQ acknowledge - * register) is preserved from the macro above. - * If there is an IPI, we immediately signal end of interrupt on the - * controller, since this requires the original irqstat value which - * we won't easily be able to recreate later. - */ - - .macro test_for_ipi, irqnr, irqstat, base, tmp - bic \irqnr, \irqstat, #0x1c00 - cmp \irqnr, #16 - strcc \irqstat, [\base, #GIC_CPU_EOI] - cmpcs \irqnr, \irqnr - .endm |