diff options
Diffstat (limited to 'arch/arm/Kconfig.debug')
| -rw-r--r-- | arch/arm/Kconfig.debug | 189 |
1 files changed, 170 insertions, 19 deletions
diff --git a/arch/arm/Kconfig.debug b/arch/arm/Kconfig.debug index 661030d6bc6..1d41908d5cd 100644 --- a/arch/arm/Kconfig.debug +++ b/arch/arm/Kconfig.debug @@ -32,7 +32,7 @@ config FRAME_POINTER config ARM_UNWIND bool "Enable stack unwinding support (EXPERIMENTAL)" - depends on AEABI && EXPERIMENTAL + depends on AEABI default y help This option enables stack unwinding support in the kernel @@ -89,6 +89,10 @@ choice bool "Kernel low-level debugging on 9263 and 9g45" depends on HAVE_AT91_DBGU1 + config DEBUG_BCM2835 + bool "Kernel low-level debugging on BCM2835 PL011 UART" + depends on ARCH_BCM2835 + config DEBUG_CLPS711X_UART1 bool "Kernel low-level debugging messages via UART1" depends on ARCH_CLPS711X @@ -103,6 +107,13 @@ choice Say Y here if you want the debug print routines to direct their output to the second serial port on these devices. + config DEBUG_CNS3XXX + bool "Kernel Kernel low-level debugging on Cavium Networks CNS3xxx" + depends on ARCH_CNS3XXX + help + Say Y here if you want the debug print routines to direct + their output to the CNS3xxx UART0. + config DEBUG_DAVINCI_DA8XX_UART1 bool "Kernel low-level debugging on DaVinci DA8XX using UART1" depends on ARCH_DAVINCI_DA8XX @@ -205,12 +216,19 @@ choice Say Y here if you want kernel low-level debugging support on i.MX28. - config DEBUG_IMX31_IMX35_UART - bool "i.MX31 and i.MX35 Debug UART" - depends on SOC_IMX31 || SOC_IMX35 + config DEBUG_IMX31_UART + bool "i.MX31 Debug UART" + depends on SOC_IMX31 + help + Say Y here if you want kernel low-level debugging support + on i.MX31. + + config DEBUG_IMX35_UART + bool "i.MX35 Debug UART" + depends on SOC_IMX35 help Say Y here if you want kernel low-level debugging support - on i.MX31 or i.MX35. + on i.MX35. config DEBUG_IMX51_UART bool "i.MX51 Debug UART" @@ -219,19 +237,19 @@ choice Say Y here if you want kernel low-level debugging support on i.MX51. - config DEBUG_IMX50_IMX53_UART - bool "i.MX50 and i.MX53 Debug UART" - depends on SOC_IMX50 || SOC_IMX53 + config DEBUG_IMX53_UART + bool "i.MX53 Debug UART" + depends on SOC_IMX53 help Say Y here if you want kernel low-level debugging support - on i.MX50 or i.MX53. + on i.MX53. config DEBUG_IMX6Q_UART - bool "i.MX6Q Debug UART" + bool "i.MX6Q/DL Debug UART" depends on SOC_IMX6Q help Say Y here if you want kernel low-level debugging support - on i.MX6Q. + on i.MX6Q/DL. config DEBUG_MMP_UART2 bool "Kernel low-level debugging message via MMP UART2" @@ -291,6 +309,20 @@ choice Say Y here if you want kernel low-level debugging support on MVEBU based platforms. + config DEBUG_NOMADIK_UART + bool "Kernel low-level debugging messages via NOMADIK UART" + depends on ARCH_NOMADIK + help + Say Y here if you want kernel low-level debugging support + on NOMADIK based platforms. + + config DEBUG_OMAP2PLUS_UART + bool "Kernel low-level debugging messages via OMAP2PLUS UART" + depends on ARCH_OMAP2PLUS + help + Say Y here if you want kernel low-level debugging support + on OMAP2PLUS based platforms. + config DEBUG_PICOXCELL_UART depends on ARCH_PICOXCELL bool "Use PicoXcell UART for low-level debug" @@ -298,6 +330,13 @@ choice Say Y here if you want kernel low-level debugging support on PicoXcell based platforms. + config DEBUG_PXA_UART1 + depends on ARCH_PXA + bool "Use PXA UART1 for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on PXA UART1. + config DEBUG_REALVIEW_STD_PORT bool "RealView Default UART" depends on ARCH_REALVIEW @@ -316,6 +355,7 @@ choice config DEBUG_S3C_UART0 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 0 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -327,6 +367,7 @@ choice config DEBUG_S3C_UART1 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 1 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -338,6 +379,7 @@ choice config DEBUG_S3C_UART2 depends on PLAT_SAMSUNG + select DEBUG_EXYNOS_UART if ARCH_EXYNOS bool "Use S3C UART 2 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -349,6 +391,7 @@ choice config DEBUG_S3C_UART3 depends on PLAT_SAMSUNG && ARCH_EXYNOS + select DEBUG_EXYNOS_UART bool "Use S3C UART 3 for low-level debug" help Say Y here if you want the debug print routines to direct @@ -386,6 +429,27 @@ choice Say Y here if you want kernel low-level debugging support on Tegra based platforms. + config DEBUG_SIRFPRIMA2_UART1 + bool "Kernel low-level debugging messages via SiRFprimaII UART1" + depends on ARCH_PRIMA2 + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFprimaII devices. + + config DEBUG_SIRFMARCO_UART1 + bool "Kernel low-level debugging messages via SiRFmarco UART1" + depends on ARCH_MARCO + help + Say Y here if you want the debug print routines to direct + their output to the uart1 port on SiRFmarco devices. + + config DEBUG_UX500_UART + depends on ARCH_U8500 + bool "Use Ux500 UART for low-level debug" + help + Say Y here if you want kernel low-level debugging support + on Ux500 based platforms. + config DEBUG_VEXPRESS_UART0_DETECT bool "Autodetect UART0 on Versatile Express Cortex-A core tiles" depends on ARCH_VEXPRESS && CPU_CP15_MMU @@ -412,6 +476,13 @@ choice of the tiles using the RS1 memory map, including all new A-class core tiles, FPGA-based SMMs and software models. + config DEBUG_VT8500_UART0 + bool "Use UART0 on VIA/Wondermedia SoCs" + depends on ARCH_VT8500 + help + This option selects UART0 on VIA/Wondermedia System-on-a-chip + devices, including VT8500, WM8505, WM8650 and WM8850. + config DEBUG_LL_UART_NONE bool "No low-level debugging UART" depends on !ARCH_MULTIPLATFORM @@ -450,17 +521,74 @@ choice endchoice -config DEBUG_IMX6Q_UART_PORT - int "i.MX6Q Debug UART Port (1-5)" if DEBUG_IMX6Q_UART - range 1 5 +config DEBUG_EXYNOS_UART + bool + +config DEBUG_IMX_UART_PORT + int "i.MX Debug UART Port Selection" if DEBUG_IMX1_UART || \ + DEBUG_IMX25_UART || \ + DEBUG_IMX21_IMX27_UART || \ + DEBUG_IMX31_UART || \ + DEBUG_IMX35_UART || \ + DEBUG_IMX51_UART || \ + DEBUG_IMX53_UART || \ + DEBUG_IMX6Q_UART default 1 - depends on SOC_IMX6Q + depends on ARCH_MXC help Choose UART port on which kernel low-level debug messages should be output. choice prompt "Low-level debug console UART" + depends on DEBUG_OMAP2PLUS_UART + + config DEBUG_OMAP2UART1 + bool "OMAP2/3/4 UART1 (omap2/3 sdp boards and some omap3 boards)" + help + This covers at least h4, 2430sdp, 3430sdp, 3630sdp, + omap3 torpedo and 3530 lv som. + + config DEBUG_OMAP2UART2 + bool "OMAP2/3/4 UART2" + + config DEBUG_OMAP2UART3 + bool "OMAP2 UART3 (n8x0)" + + config DEBUG_OMAP3UART3 + bool "OMAP3 UART3 (most omap3 boards)" + help + This covers at least cm_t3x, beagle, crane, devkit8000, + igep00x0, ldp, n900, n9(50), pandora, overo, touchbook, + and 3517evm. + + config DEBUG_OMAP4UART3 + bool "OMAP4/5 UART3 (omap4 blaze, panda, omap5 sevm)" + + config DEBUG_OMAP3UART4 + bool "OMAP36XX UART4" + + config DEBUG_OMAP4UART4 + bool "OMAP4/5 UART4" + + config DEBUG_TI81XXUART1 + bool "TI81XX UART1 (ti8148evm)" + + config DEBUG_TI81XXUART2 + bool "TI81XX UART2" + + config DEBUG_TI81XXUART3 + bool "TI81XX UART3 (ti8168evm)" + + config DEBUG_AM33XXUART1 + bool "AM33XX UART1" + + config DEBUG_ZOOM_UART + bool "Zoom2/3 UART" +endchoice + +choice + prompt "Low-level debug console UART" depends on DEBUG_LL && DEBUG_TEGRA_UART config TEGRA_DEBUG_UART_AUTO_ODMDATA @@ -491,25 +619,48 @@ endchoice config DEBUG_LL_INCLUDE string + default "debug/bcm2835.S" if DEBUG_BCM2835 + default "debug/cns3xxx.S" if DEBUG_CNS3XXX + default "debug/exynos.S" if DEBUG_EXYNOS_UART + default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/icedcc.S" if DEBUG_ICEDCC default "debug/imx.S" if DEBUG_IMX1_UART || \ DEBUG_IMX25_UART || \ DEBUG_IMX21_IMX27_UART || \ - DEBUG_IMX31_IMX35_UART || \ + DEBUG_IMX31_UART || \ + DEBUG_IMX35_UART || \ DEBUG_IMX51_UART || \ - DEBUG_IMX50_IMX53_UART ||\ + DEBUG_IMX53_UART ||\ DEBUG_IMX6Q_UART - default "debug/highbank.S" if DEBUG_HIGHBANK_UART default "debug/mvebu.S" if DEBUG_MVEBU_UART + default "debug/mxs.S" if DEBUG_IMX23_UART || DEBUG_IMX28_UART + default "debug/nomadik.S" if DEBUG_NOMADIK_UART + default "debug/omap2plus.S" if DEBUG_OMAP2PLUS_UART default "debug/picoxcell.S" if DEBUG_PICOXCELL_UART + default "debug/pxa.S" if DEBUG_PXA_UART1 || DEBUG_MMP_UART2 || \ + DEBUG_MMP_UART3 + default "debug/sirf.S" if DEBUG_SIRFPRIMA2_UART1 || DEBUG_SIRFMARCO_UART1 default "debug/socfpga.S" if DEBUG_SOCFPGA_UART default "debug/sunxi.S" if DEBUG_SUNXI_UART0 || DEBUG_SUNXI_UART1 + default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/ux500.S" if DEBUG_UX500_UART default "debug/vexpress.S" if DEBUG_VEXPRESS_UART0_DETECT || \ DEBUG_VEXPRESS_UART0_CA9 || DEBUG_VEXPRESS_UART0_RS1 - default "debug/tegra.S" if DEBUG_TEGRA_UART + default "debug/vt8500.S" if DEBUG_VT8500_UART0 default "debug/zynq.S" if DEBUG_ZYNQ_UART0 || DEBUG_ZYNQ_UART1 default "mach/debug-macro.S" +config DEBUG_UNCOMPRESS + bool + default y if ARCH_MULTIPLATFORM && DEBUG_LL && \ + !DEBUG_OMAP2PLUS_UART && \ + !DEBUG_TEGRA_UART + +config UNCOMPRESS_INCLUDE + string + default "debug/uncompress.h" if ARCH_MULTIPLATFORM + default "mach/uncompress.h" + config EARLY_PRINTK bool "Early printk" depends on DEBUG_LL |