diff options
38 files changed, 339 insertions, 401 deletions
diff --git a/MAINTAINERS b/MAINTAINERS index 6388a96dc1c..9fb6bd96f8a 100644 --- a/MAINTAINERS +++ b/MAINTAINERS @@ -4672,7 +4672,7 @@ L: linux-omap@vger.kernel.org W: http://www.muru.com/linux/omap/ W: http://linux.omap.com/ Q: http://patchwork.kernel.org/project/linux-omap/list/ -T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6.git +T: git git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap.git S: Maintained F: arch/arm/*omap*/ diff --git a/arch/arm/mach-omap1/board-palmz71.c b/arch/arm/mach-omap1/board-palmz71.c index c6fe61dfe85..42061573e38 100644 --- a/arch/arm/mach-omap1/board-palmz71.c +++ b/arch/arm/mach-omap1/board-palmz71.c @@ -42,7 +42,6 @@ #include <plat/irda.h> #include <plat/keypad.h> #include <plat/common.h> -#include <plat/omap-alsa.h> #include <linux/spi/spi.h> #include <linux/spi/ads7846.h> diff --git a/arch/arm/mach-omap1/pm.c b/arch/arm/mach-omap1/pm.c index 495b3987d46..89ea20ca0cc 100644 --- a/arch/arm/mach-omap1/pm.c +++ b/arch/arm/mach-omap1/pm.c @@ -116,7 +116,7 @@ void omap1_pm_idle(void) return; } -#ifdef CONFIG_OMAP_MPU_TIMER +#if defined(CONFIG_OMAP_MPU_TIMER) && !defined(CONFIG_OMAP_DM_TIMER) #warning Enable 32kHz OS timer in order to allow sleep states in idle use_idlect1 = use_idlect1 & ~(1 << 9); #else diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index 42918940c53..90154e411da 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -226,7 +226,6 @@ static int devkit8000_twl_gpio_setup(struct device *dev, { int ret; - omap_mux_init_gpio(29, OMAP_PIN_INPUT); /* gpio + 0 is "mmc0_cd" (input/IRQ) */ mmc[0].gpio_cd = gpio + 0; omap2_hsmmc_init(mmc); diff --git a/arch/arm/mach-omap2/board-generic.c b/arch/arm/mach-omap2/board-generic.c index 0cc9094e5ee..fb55fa3dad5 100644 --- a/arch/arm/mach-omap2/board-generic.c +++ b/arch/arm/mach-omap2/board-generic.c @@ -28,6 +28,7 @@ * XXX: Still needed to boot until the i2c & twl driver is adapted to * device-tree */ +#ifdef CONFIG_ARCH_OMAP4 static struct twl4030_platform_data sdp4430_twldata = { .irq_base = TWL6030_IRQ_BASE, .irq_end = TWL6030_IRQ_END, @@ -37,7 +38,9 @@ static void __init omap4_i2c_init(void) { omap4_pmic_init("twl6030", &sdp4430_twldata); } +#endif +#ifdef CONFIG_ARCH_OMAP3 static struct twl4030_platform_data beagle_twldata = { .irq_base = TWL4030_IRQ_BASE, .irq_end = TWL4030_IRQ_END, @@ -47,6 +50,7 @@ static void __init omap3_i2c_init(void) { omap3_pmic_init("twl4030", &beagle_twldata); } +#endif static struct of_device_id omap_dt_match_table[] __initdata = { { .compatible = "simple-bus", }, @@ -72,17 +76,21 @@ static void __init omap_generic_init(void) of_platform_populate(NULL, omap_dt_match_table, NULL, NULL); } +#ifdef CONFIG_ARCH_OMAP4 static void __init omap4_init(void) { omap4_i2c_init(); omap_generic_init(); } +#endif +#ifdef CONFIG_ARCH_OMAP3 static void __init omap3_init(void) { omap3_i2c_init(); omap_generic_init(); } +#endif #if defined(CONFIG_SOC_OMAP2420) static const char *omap242x_boards_compat[] __initdata = { diff --git a/arch/arm/mach-omap2/board-h4.c b/arch/arm/mach-omap2/board-h4.c index c12666ee701..8b351d92a1c 100644 --- a/arch/arm/mach-omap2/board-h4.c +++ b/arch/arm/mach-omap2/board-h4.c @@ -25,6 +25,7 @@ #include <linux/err.h> #include <linux/clk.h> #include <linux/io.h> +#include <linux/input/matrix_keypad.h> #include <mach/hardware.h> #include <asm/mach-types.h> @@ -34,7 +35,6 @@ #include <plat/usb.h> #include <plat/board.h> #include <plat/common.h> -#include <plat/keypad.h> #include <plat/menelaus.h> #include <plat/dma.h> #include <plat/gpmc.h> @@ -50,10 +50,8 @@ #define H4_ETHR_GPIO_IRQ 92 -static unsigned int row_gpios[6] = { 88, 89, 124, 11, 6, 96 }; -static unsigned int col_gpios[7] = { 90, 91, 100, 36, 12, 97, 98 }; - -static const unsigned int h4_keymap[] = { +#if defined(CONFIG_KEYBOARD_MATRIX) || defined(CONFIG_KEYBOARD_MATRIX_MODULE) +static const uint32_t board_matrix_keys[] = { KEY(0, 0, KEY_LEFT), KEY(1, 0, KEY_RIGHT), KEY(2, 0, KEY_A), @@ -86,6 +84,71 @@ static const unsigned int h4_keymap[] = { KEY(4, 5, KEY_ENTER), }; +static const struct matrix_keymap_data board_keymap_data = { + .keymap = board_matrix_keys, + .keymap_size = ARRAY_SIZE(board_matrix_keys), +}; + +static unsigned int board_keypad_row_gpios[] = { + 88, 89, 124, 11, 6, 96 +}; + +static unsigned int board_keypad_col_gpios[] = { + 90, 91, 100, 36, 12, 97, 98 +}; + +static struct matrix_keypad_platform_data board_keypad_platform_data = { + .keymap_data = &board_keymap_data, + .row_gpios = board_keypad_row_gpios, + .num_row_gpios = ARRAY_SIZE(board_keypad_row_gpios), + .col_gpios = board_keypad_col_gpios, + .num_col_gpios = ARRAY_SIZE(board_keypad_col_gpios), + .active_low = 1, + + .debounce_ms = 20, + .col_scan_delay_us = 5, +}; + +static struct platform_device board_keyboard = { + .name = "matrix-keypad", + .id = -1, + .dev = { + .platform_data = &board_keypad_platform_data, + }, +}; +static void __init board_mkp_init(void) +{ + omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); + if (omap_has_menelaus()) { + omap_mux_init_signal("sdrc_a14.gpio0", + OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("vlynq_rx0.gpio_15", 0); + omap_mux_init_signal("gpio_98", 0); + board_keypad_row_gpios[5] = 0; + board_keypad_col_gpios[2] = 15; + board_keypad_col_gpios[6] = 18; + } else { + omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP); + omap_mux_init_signal("gpio_100", 0); + omap_mux_init_signal("gpio_98", 0); + } + omap_mux_init_signal("gpio_90", 0); + omap_mux_init_signal("gpio_91", 0); + omap_mux_init_signal("gpio_36", 0); + omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); + omap_mux_init_signal("gpio_97", 0); + + platform_device_register(&board_keyboard); +} +#else +static inline void board_mkp_init(void) +{ +} +#endif + static struct mtd_partition h4_partitions[] = { /* bootloader (U-Boot, etc) in first sector */ { @@ -137,31 +200,8 @@ static struct platform_device h4_flash_device = { .resource = &h4_flash_resource, }; -static const struct matrix_keymap_data h4_keymap_data = { - .keymap = h4_keymap, - .keymap_size = ARRAY_SIZE(h4_keymap), -}; - -static struct omap_kp_platform_data h4_kp_data = { - .rows = 6, - .cols = 7, - .keymap_data = &h4_keymap_data, - .rep = true, - .row_gpios = row_gpios, - .col_gpios = col_gpios, -}; - -static struct platform_device h4_kp_device = { - .name = "omap-keypad", - .id = -1, - .dev = { - .platform_data = &h4_kp_data, - }, -}; - static struct platform_device *h4_devices[] __initdata = { &h4_flash_device, - &h4_kp_device, }; static struct panel_generic_dpi_data h4_panel_data = { @@ -336,31 +376,7 @@ static void __init omap_h4_init(void) * if not needed. */ -#if defined(CONFIG_KEYBOARD_OMAP) || defined(CONFIG_KEYBOARD_OMAP_MODULE) - omap_mux_init_gpio(88, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_gpio(89, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_gpio(124, OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("mcbsp2_dr.gpio_11", OMAP_PULL_ENA | OMAP_PULL_UP); - if (omap_has_menelaus()) { - omap_mux_init_signal("sdrc_a14.gpio0", - OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("vlynq_rx0.gpio_15", 0); - omap_mux_init_signal("gpio_98", 0); - row_gpios[5] = 0; - col_gpios[2] = 15; - col_gpios[6] = 18; - } else { - omap_mux_init_signal("gpio_96", OMAP_PULL_ENA | OMAP_PULL_UP); - omap_mux_init_signal("gpio_100", 0); - omap_mux_init_signal("gpio_98", 0); - } - omap_mux_init_signal("gpio_90", 0); - omap_mux_init_signal("gpio_91", 0); - omap_mux_init_signal("gpio_36", 0); - omap_mux_init_signal("mcbsp2_clkx.gpio_12", 0); - omap_mux_init_signal("gpio_97", 0); -#endif - + board_mkp_init(); i2c_register_board_info(1, h4_i2c_board_info, ARRAY_SIZE(h4_i2c_board_info)); diff --git a/arch/arm/mach-omap2/clkt_dpll.c b/arch/arm/mach-omap2/clkt_dpll.c index bcffee001bf..e069a9be93d 100644 --- a/arch/arm/mach-omap2/clkt_dpll.c +++ b/arch/arm/mach-omap2/clkt_dpll.c @@ -46,10 +46,19 @@ (DPLL_SCALE_FACTOR / DPLL_SCALE_BASE)) /* DPLL valid Fint frequency band limits - from 34xx TRM Section 4.7.6.2 */ -#define DPLL_FINT_BAND1_MIN 750000 -#define DPLL_FINT_BAND1_MAX 2100000 -#define DPLL_FINT_BAND2_MIN 7500000 -#define DPLL_FINT_BAND2_MAX 21000000 +#define OMAP3430_DPLL_FINT_BAND1_MIN 750000 +#define OMAP3430_DPLL_FINT_BAND1_MAX 2100000 +#define OMAP3430_DPLL_FINT_BAND2_MIN 7500000 +#define OMAP3430_DPLL_FINT_BAND2_MAX 21000000 + +/* + * DPLL valid Fint frequency range for OMAP36xx and OMAP4xxx. + * From device data manual section 4.3 "DPLL and DLL Specifications". + */ +#define OMAP3PLUS_DPLL_FINT_JTYPE_MIN 500000 +#define OMAP3PLUS_DPLL_FINT_JTYPE_MAX 2500000 +#define OMAP3PLUS_DPLL_FINT_MIN 32000 +#define OMAP3PLUS_DPLL_FINT_MAX 52000000 /* _dpll_test_fint() return codes */ #define DPLL_FINT_UNDERFLOW -1 @@ -71,33 +80,43 @@ static int _dpll_test_fint(struct clk *clk, u8 n) { struct dpll_data *dd; - long fint; + long fint, fint_min, fint_max; int ret = 0; dd = clk->dpll_data; /* DPLL divider must result in a valid jitter correction val */ fint = clk->parent->rate / n; - if (fint < DPLL_FINT_BAND1_MIN) { + if (cpu_is_omap24xx()) { + /* Should not be called for OMAP2, so warn if it is called */ + WARN(1, "No fint limits available for OMAP2!\n"); + return DPLL_FINT_INVALID; + } else if (cpu_is_omap3430()) { + fint_min = OMAP3430_DPLL_FINT_BAND1_MIN; + fint_max = OMAP3430_DPLL_FINT_BAND2_MAX; + } else if (dd->flags & DPLL_J_TYPE) { + fint_min = OMAP3PLUS_DPLL_FINT_JTYPE_MIN; + fint_max = OMAP3PLUS_DPLL_FINT_JTYPE_MAX; + } else { + fint_min = OMAP3PLUS_DPLL_FINT_MIN; + fint_max = OMAP3PLUS_DPLL_FINT_MAX; + } + + if (fint < fint_min) { pr_debug("rejecting n=%d due to Fint failure, " "lowering max_divider\n", n); dd->max_divider = n; ret = DPLL_FINT_UNDERFLOW; - - } else if (fint > DPLL_FINT_BAND1_MAX && - fint < DPLL_FINT_BAND2_MIN) { - - pr_debug("rejecting n=%d due to Fint failure\n", n); - ret = DPLL_FINT_INVALID; - - } else if (fint > DPLL_FINT_BAND2_MAX) { - + } else if (fint > fint_max) { pr_debug("rejecting n=%d due to Fint failure, " "boosting min_divider\n", n); dd->min_divider = n; ret = DPLL_FINT_INVALID; - + } else if (cpu_is_omap3430() && fint > OMAP3430_DPLL_FINT_BAND1_MAX && + fint < OMAP3430_DPLL_FINT_BAND2_MIN) { + pr_debug("rejecting n=%d due to Fint failure\n", n); + ret = DPLL_FINT_INVALID; } return ret; diff --git a/arch/arm/mach-omap2/clock.h b/arch/arm/mach-omap2/clock.h index 48ac568881b..2311bc21722 100644 --- a/arch/arm/mach-omap2/clock.h +++ b/arch/arm/mach-omap2/clock.h @@ -66,6 +66,8 @@ void omap3_noncore_dpll_disable(struct clk *clk); int omap4_dpllmx_gatectrl_read(struct clk *clk); void omap4_dpllmx_allow_gatectrl(struct clk *clk); void omap4_dpllmx_deny_gatectrl(struct clk *clk); +long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate); +unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk); #ifdef CONFIG_OMAP_RESET_CLOCKS void omap2_clk_disable_unused(struct clk *clk); diff --git a/arch/arm/mach-omap2/clock2420_data.c b/arch/arm/mach-omap2/clock2420_data.c index 14a6277dd18..61ad3855f10 100644 --- a/arch/arm/mach-omap2/clock2420_data.c +++ b/arch/arm/mach-omap2/clock2420_data.c @@ -1898,18 +1898,6 @@ static struct omap_clk omap2420_clks[] = { CLK(NULL, "pka_ick", &pka_ick, CK_242X), CLK(NULL, "usb_fck", &usb_fck, CK_242X), CLK("musb-hdrc", "fck", &osc_ck, CK_242X), - CLK("omap_timer.1", "fck", &gpt1_fck, CK_242X), - CLK("omap_timer.2", "fck", &gpt2_fck, CK_242X), - CLK("omap_timer.3", "fck", &gpt3_fck, CK_242X), - CLK("omap_timer.4", "fck", &gpt4_fck, CK_242X), - CLK("omap_timer.5", "fck", &gpt5_fck, CK_242X), - CLK("omap_timer.6", "fck", &gpt6_fck, CK_242X), - CLK("omap_timer.7", "fck", &gpt7_fck, CK_242X), - CLK("omap_timer.8", "fck", &gpt8_fck, CK_242X), - CLK("omap_timer.9", "fck", &gpt9_fck, CK_242X), - CLK("omap_timer.10", "fck", &gpt10_fck, CK_242X), - CLK("omap_timer.11", "fck", &gpt11_fck, CK_242X), - CLK("omap_timer.12", "fck", &gpt12_fck, CK_242X), CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), diff --git a/arch/arm/mach-omap2/clock2430_data.c b/arch/arm/mach-omap2/clock2430_data.c index ea6717cfa3c..0cc12879e7b 100644 --- a/arch/arm/mach-omap2/clock2430_data.c +++ b/arch/arm/mach-omap2/clock2430_data.c @@ -1998,18 +1998,6 @@ static struct omap_clk omap2430_clks[] = { CLK(NULL, "mdm_intc_ick", &mdm_intc_ick, CK_243X), CLK("omap_hsmmc.0", "mmchsdb_fck", &mmchsdb1_fck, CK_243X), CLK("omap_hsmmc.1", "mmchsdb_fck", &mmchsdb2_fck, CK_243X), - CLK("omap_timer.1", "fck", &gpt1_fck, CK_243X), - CLK("omap_timer.2", "fck", &gpt2_fck, CK_243X), - CLK("omap_timer.3", "fck", &gpt3_fck, CK_243X), - CLK("omap_timer.4", "fck", &gpt4_fck, CK_243X), - CLK("omap_timer.5", "fck", &gpt5_fck, CK_243X), - CLK("omap_timer.6", "fck", &gpt6_fck, CK_243X), - CLK("omap_timer.7", "fck", &gpt7_fck, CK_243X), - CLK("omap_timer.8", "fck", &gpt8_fck, CK_243X), - CLK("omap_timer.9", "fck", &gpt9_fck, CK_243X), - CLK("omap_timer.10", "fck", &gpt10_fck, CK_243X), - CLK("omap_timer.11", "fck", &gpt11_fck, CK_243X), - CLK("omap_timer.12", "fck", &gpt12_fck, CK_243X), CLK("omap_timer.1", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.2", "32k_ck", &func_32k_ck, CK_243X), CLK("omap_timer.3", "32k_ck", &func_32k_ck, CK_243X), diff --git a/arch/arm/mach-omap2/clock3xxx_data.c b/arch/arm/mach-omap2/clock3xxx_data.c index 65dd363163b..5d0064a4fb5 100644 --- a/arch/arm/mach-omap2/clock3xxx_data.c +++ b/arch/arm/mach-omap2/clock3xxx_data.c @@ -3464,18 +3464,6 @@ static struct omap_clk omap3xxx_clks[] = { CLK("musb-am35x", "fck", &hsotgusb_fck_am35xx, CK_AM35XX), CLK(NULL, "hecc_ck", &hecc_ck, CK_AM35XX), CLK(NULL, "uart4_ick", &uart4_ick_am35xx, CK_AM35XX), - CLK("omap_timer.1", "fck", &gpt1_fck, CK_3XXX), - CLK("omap_timer.2", "fck", &gpt2_fck, CK_3XXX), - CLK("omap_timer.3", "fck", &gpt3_fck, CK_3XXX), - CLK("omap_timer.4", "fck", &gpt4_fck, CK_3XXX), - CLK("omap_timer.5", "fck", &gpt5_fck, CK_3XXX), - CLK("omap_timer.6", "fck", &gpt6_fck, CK_3XXX), - CLK("omap_timer.7", "fck", &gpt7_fck, CK_3XXX), - CLK("omap_timer.8", "fck", &gpt8_fck, CK_3XXX), - CLK("omap_timer.9", "fck", &gpt9_fck, CK_3XXX), - CLK("omap_timer.10", "fck", &gpt10_fck, CK_3XXX), - CLK("omap_timer.11", "fck", &gpt11_fck, CK_3XXX), - CLK("omap_timer.12", "fck", &gpt12_fck, CK_3XXX), CLK("omap_timer.1", "32k_ck", &omap_32k_fck, CK_3XXX), CLK("omap_timer.2", "32k_ck", &omap_32k_fck, CK_3XXX), CLK("omap_timer.3", "32k_ck", &omap_32k_fck, CK_3XXX), diff --git a/arch/arm/mach-omap2/clock44xx.h b/arch/arm/mach-omap2/clock44xx.h index 7ceb870e7ab..287a46f78d9 100644 --- a/arch/arm/mach-omap2/clock44xx.h +++ b/arch/arm/mach-omap2/clock44xx.h @@ -8,6 +8,13 @@ #ifndef __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H #define __ARCH_ARM_MACH_OMAP2_CLOCK44XX_H +/* + * OMAP4430_REGM4XEN_MULT: If the CM_CLKMODE_DPLL_ABE.DPLL_REGM4XEN bit is + * set, then the DPLL's lock frequency is multiplied by 4 (OMAP4430 TRM + * vV Section 3.6.3.3.1 "DPLLs Output Clocks Parameters") + */ +#define OMAP4430_REGM4XEN_MULT 4 + int omap4xxx_clk_init(void); #endif diff --git a/arch/arm/mach-omap2/clock44xx_data.c b/arch/arm/mach-omap2/clock44xx_data.c index 946bf04a956..0798a802497 100644 --- a/arch/arm/mach-omap2/clock44xx_data.c +++ b/arch/arm/mach-omap2/clock44xx_data.c @@ -270,8 +270,8 @@ static struct clk dpll_abe_ck = { .dpll_data = &dpll_abe_dd, .init = &omap2_init_dpll_parent, .ops = &clkops_omap3_noncore_dpll_ops, - .recalc = &omap3_dpll_recalc, - .round_rate = &omap2_dpll_round_rate, + .recalc = &omap4_dpll_regm4xen_recalc, + .round_rate = &omap4_dpll_regm4xen_round_rate, .set_rate = &omap3_noncore_dpll_set_rate, }; @@ -1195,11 +1195,25 @@ static struct clk l4_wkup_clk_mux_ck = { .recalc = &omap2_clksel_recalc, }; +static const struct clksel_rate div2_2to1_rates[] = { + { .div = 1, .val = 1, .flags = RATE_IN_4430 }, + { .div = 2, .val = 0, .flags = RATE_IN_4430 }, + { .div = 0 }, +}; + +static const struct clksel ocp_abe_iclk_div[] = { + { .parent = &aess_fclk, .rates = div2_2to1_rates }, + { .parent = NULL }, +}; + static struct clk ocp_abe_iclk = { .name = "ocp_abe_iclk", .parent = &aess_fclk, + .clksel = ocp_abe_iclk_div, + .clksel_reg = OMAP4430_CM1_ABE_AESS_CLKCTRL, + .clksel_mask = OMAP4430_CLKSEL_AESS_FCLK_MASK, .ops = &clkops_null, - .recalc = &followparent_recalc, + .recalc = &omap2_clksel_recalc, }; static struct clk per_abe_24m_fclk = { @@ -1398,9 +1412,9 @@ static struct clk dss_dss_clk = { }; static const struct clksel_rate div3_8to32_rates[] = { - { .div = 8, .val = 0, .flags = RATE_IN_44XX }, - { .div = 16, .val = 1, .flags = RATE_IN_44XX }, - { .div = 32, .val = 2, .flags = RATE_IN_44XX }, + { .div = 8, .val = 0, .flags = RATE_IN_4460 }, + { .div = 16, .val = 1, .flags = RATE_IN_4460 }, + { .div = 32, .val = 2, .flags = RATE_IN_4460 }, { .div = 0 }, }; @@ -3363,17 +3377,6 @@ static struct omap_clk omap44xx_clks[] = { CLK("usbhs-omap.0", "usbhost_ick", &dummy_ck, CK_443X), CLK("usbhs-omap.0", "usbtll_fck", &dummy_ck, CK_443X), CLK("omap_wdt", "ick", &dummy_ck, CK_443X), - CLK("omap_timer.1", "fck", &timer1_fck, CK_443X), - CLK("omap_timer.2", "fck", &timer2_fck, CK_443X), - CLK("omap_timer.3", "fck", &timer3_fck, CK_443X), - CLK("omap_timer.4", "fck", &timer4_fck, CK_443X), - CLK("omap_timer.5", "fck", &timer5_fck, CK_443X), - CLK("omap_timer.6", "fck", &timer6_fck, CK_443X), - CLK("omap_timer.7", "fck", &timer7_fck, CK_443X), - CLK("omap_timer.8", "fck", &timer8_fck, CK_443X), - CLK("omap_timer.9", "fck", &timer9_fck, CK_443X), - CLK("omap_timer.10", "fck", &timer10_fck, CK_443X), - CLK("omap_timer.11", "fck", &timer11_fck, CK_443X), CLK("omap_timer.1", "32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.2", "32k_ck", &sys_32k_ck, CK_443X), CLK("omap_timer.3", "32k_ck", &sys_32k_ck, CK_443X), @@ -3403,12 +3406,12 @@ int __init omap4xxx_clk_init(void) struct omap_clk *c; u32 cpu_clkflg; - if (cpu_is_omap44xx()) { + if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; cpu_clkflg = CK_443X; } else if (cpu_is_omap446x()) { - cpu_mask = RATE_IN_4460; - cpu_clkflg = CK_446X; + cpu_mask = RATE_IN_4460 | RATE_IN_4430; + cpu_clkflg = CK_446X | CK_443X; } else { return 0; } diff --git a/arch/arm/mach-omap2/devices.c b/arch/arm/mach-omap2/devices.c index 68ec03152d5..c15cfada5f1 100644 --- a/arch/arm/mach-omap2/devices.c +++ b/arch/arm/mach-omap2/devices.c @@ -318,18 +318,10 @@ static inline void omap_init_audio(void) {} #if defined(CONFIG_SND_OMAP_SOC_MCPDM) || \ defined(CONFIG_SND_OMAP_SOC_MCPDM_MODULE) -static struct omap_device_pm_latency omap_mcpdm_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - static void omap_init_mcpdm(void) { struct omap_hwmod *oh; - struct omap_device *od; + struct platform_device *pdev; oh = omap_hwmod_lookup("mcpdm"); if (!oh) { @@ -337,11 +329,8 @@ static void omap_init_mcpdm(void) return; } - od = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, - omap_mcpdm_latency, - ARRAY_SIZE(omap_mcpdm_latency), 0); - if (IS_ERR(od)) - printk(KERN_ERR "Could not build omap_device for omap-mcpdm-dai\n"); + pdev = omap_device_build("omap-mcpdm", -1, oh, NULL, 0, NULL, 0, 0); + WARN(IS_ERR(pdev), "Can't build omap_device for omap-mcpdm.\n"); } #else static inline void omap_init_mcpdm(void) {} diff --git a/arch/arm/mach-omap2/dpll3xxx.c b/arch/arm/mach-omap2/dpll3xxx.c index f77022be783..fc56745676f 100644 --- a/arch/arm/mach-omap2/dpll3xxx.c +++ b/arch/arm/mach-omap2/dpll3xxx.c @@ -390,7 +390,8 @@ int omap3_noncore_dpll_enable(struct clk *clk) * propagating? */ if (!r) - clk->rate = omap2_get_dpll_rate(clk); + clk->rate = (clk->recalc) ? clk->recalc(clk) : + omap2_get_dpll_rate(clk); return r; } @@ -424,6 +425,7 @@ void omap3_noncore_dpll_disable(struct clk *clk) int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) { struct clk *new_parent = NULL; + unsigned long hw_rate; u16 freqsel = 0; struct dpll_data *dd; int ret; @@ -435,7 +437,8 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) if (!dd) return -EINVAL; - if (rate == omap2_get_dpll_rate(clk)) + hw_rate = (clk->recalc) ? clk->recalc(clk) : omap2_get_dpll_rate(clk); + if (rate == hw_rate) return 0; /* @@ -455,7 +458,7 @@ int omap3_noncore_dpll_set_rate(struct clk *clk, unsigned long rate) new_parent = dd->clk_bypass; } else { if (dd->last_rounded_rate != rate) - omap2_dpll_round_rate(clk, rate); + rate = clk->round_rate(clk, rate); if (dd->last_rounded_rate == 0) return -EINVAL; diff --git a/arch/arm/mach-omap2/dpll44xx.c b/arch/arm/mach-omap2/dpll44xx.c index 4e4da6160d0..9c6a296b3dc 100644 --- a/arch/arm/mach-omap2/dpll44xx.c +++ b/arch/arm/mach-omap2/dpll44xx.c @@ -19,6 +19,7 @@ #include <plat/clock.h> #include "clock.h" +#include "clock44xx.h" #include "cm-regbits-44xx.h" /* Supported only on OMAP4 */ @@ -82,3 +83,71 @@ const struct clkops clkops_omap4_dpllmx_ops = { .deny_idle = omap4_dpllmx_deny_gatectrl, }; +/** + * omap4_dpll_regm4xen_recalc - compute DPLL rate, considering REGM4XEN bit + * @clk: struct clk * of the DPLL to compute the rate for + * + * Compute the output rate for the OMAP4 DPLL represented by @clk. + * Takes the REGM4XEN bit into consideration, which is needed for the + * OMAP4 ABE DPLL. Returns the DPLL's output rate (before M-dividers) + * upon success, or 0 upon error. + */ +unsigned long omap4_dpll_regm4xen_recalc(struct clk *clk) +{ + u32 v; + unsigned long rate; + struct dpll_data *dd; + + if (!clk || !clk->dpll_data) + return 0; + + dd = clk->dpll_data; + + rate = omap2_get_dpll_rate(clk); + + /* regm4xen adds a multiplier of 4 to DPLL calculations */ + v = __raw_readl(dd->control_reg); + if (v & OMAP4430_DPLL_REGM4XEN_MASK) + rate *= OMAP4430_REGM4XEN_MULT; + + return rate; +} + +/** + * omap4_dpll_regm4xen_round_rate - round DPLL rate, considering REGM4XEN bit + * @clk: struct clk * of the DPLL to round a rate for + * @target_rate: the desired rate of the DPLL + * + * Compute the rate that would be programmed into the DPLL hardware + * for @clk if set_rate() were to be provided with the rate + * @target_rate. Takes the REGM4XEN bit into consideration, which is + * needed for the OMAP4 ABE DPLL. Returns the rounded rate (before + * M-dividers) upon success, -EINVAL if @clk is null or not a DPLL, or + * ~0 if an error occurred in omap2_dpll_round_rate(). + */ +long omap4_dpll_regm4xen_round_rate(struct clk *clk, unsigned long target_rate) +{ + u32 v; + struct dpll_data *dd; + long r; + + if (!clk || !clk->dpll_data) + return -EINVAL; + + dd = clk->dpll_data; + + /* regm4xen adds a multiplier of 4 to DPLL calculations */ + v = __raw_readl(dd->control_reg) & OMAP4430_DPLL_REGM4XEN_MASK; + + if (v) + target_rate = target_rate / OMAP4430_REGM4XEN_MULT; + + r = omap2_dpll_round_rate(clk, target_rate); + if (r == ~0) + return r; + + if (v) + clk->dpll_data->last_rounded_rate *= OMAP4430_REGM4XEN_MULT; + + return clk->dpll_data->last_rounded_rate; +} diff --git a/arch/arm/mach-omap2/hsmmc.c b/arch/arm/mach-omap2/hsmmc.c index 77085847e4e..f4a1020559a 100644 --- a/arch/arm/mach-omap2/hsmmc.c +++ b/arch/arm/mach-omap2/hsmmc.c @@ -129,15 +129,11 @@ static void omap4_hsmmc1_before_set_reg(struct device *dev, int slot, * Assume we power both OMAP VMMC1 (for CMD, CLK, DAT0..3) and the * card with Vcc regulator (from twl4030 or whatever). OMAP has both * 1.8V and 3.0V modes, controlled by the PBIAS register. - * - * In 8-bit modes, OMAP VMMC1A (for DAT4..7) needs a supply, which - * is most naturally TWL VSIM; those pins also use PBIAS. - * - * FIXME handle VMMC1A as needed ... */ reg = omap4_ctrl_pad_readl(control_pbias_offset); reg &= ~(OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK); + OMAP4_MMC1_PWRDNZ_MASK | + OMAP4_MMC1_PBIASLITE_VMODE_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } @@ -172,12 +168,6 @@ static void omap4_hsmmc1_after_set_reg(struct device *dev, int slot, reg &= ~(OMAP4_MMC1_PWRDNZ_MASK); omap4_ctrl_pad_writel(reg, control_pbias_offset); } - } else { - reg = omap4_ctrl_pad_readl(control_pbias_offset); - reg |= (OMAP4_MMC1_PBIASLITE_PWRDNZ_MASK | - OMAP4_MMC1_PWRDNZ_MASK | - OMAP4_MMC1_PBIASLITE_VMODE_MASK); - omap4_ctrl_pad_writel(reg, control_pbias_offset); } } @@ -489,7 +479,7 @@ void __init omap2_hsmmc_init(struct omap2_hsmmc_info *controllers) OMAP4_SDMMC1_PUSTRENGTH_GRP1_MASK); reg &= ~(OMAP4_SDMMC1_PUSTRENGTH_GRP2_MASK | OMAP4_SDMMC1_PUSTRENGTH_GRP3_MASK); - reg |= (OMAP4_USBC1_DR0_SPEEDCTRL_MASK| + reg |= (OMAP4_SDMMC1_DR0_SPEEDCTRL_MASK | OMAP4_SDMMC1_DR1_SPEEDCTRL_MASK | OMAP4_SDMMC1_DR2_SPEEDCTRL_MASK); omap4_ctrl_pad_writel(reg, control_mmc1); diff --git a/arch/arm/mach-omap2/id.c b/arch/arm/mach-omap2/id.c index d27daf921c7..7f47092a193 100644 --- a/arch/arm/mach-omap2/id.c +++ b/arch/arm/mach-omap2/id.c @@ -187,8 +187,11 @@ static void __init omap3_check_features(void) OMAP3_CHECK_FEATURE(status, ISP); if (cpu_is_omap3630()) omap_features |= OMAP3_HAS_192MHZ_CLK; - if (!cpu_is_omap3505() && !cpu_is_omap3517()) + if (cpu_is_omap3430() || cpu_is_omap3630()) omap_features |= OMAP3_HAS_IO_WAKEUP; + if (cpu_is_omap3630() || omap_rev() == OMAP3430_REV_ES3_1 || + omap_rev() == OMAP3430_REV_ES3_1_2) + omap_features |= OMAP3_HAS_IO_CHAIN_CTRL; omap_features |= OMAP3_HAS_SDRC; diff --git a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h index c88420de115..1e2d3322f33 100644 --- a/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h +++ b/arch/arm/mach-omap2/include/mach/ctrl_module_pad_core_44xx.h @@ -941,10 +941,10 @@ #define OMAP4_DSI2_LANEENABLE_MASK (0x7 << 29) #define OMAP4_DSI1_LANEENABLE_SHIFT 24 #define OMAP4_DSI1_LANEENABLE_MASK (0x1f << 24) -#define OMAP4_DSI1_PIPD_SHIFT 19 -#define OMAP4_DSI1_PIPD_MASK (0x1f << 19) -#define OMAP4_DSI2_PIPD_SHIFT 14 -#define OMAP4_DSI2_PIPD_MASK (0x1f << 14) +#define OMAP4_DSI2_PIPD_SHIFT 19 +#define OMAP4_DSI2_PIPD_MASK (0x1f << 19) +#define OMAP4_DSI1_PIPD_SHIFT 14 +#define OMAP4_DSI1_PIPD_MASK (0x1f << 14) /* CONTROL_MCBSPLP */ #define OMAP4_ALBCTRLRX_FSX_SHIFT 31 diff --git a/arch/arm/mach-omap2/io.c b/arch/arm/mach-omap2/io.c index a5d8dce2a70..25d20ced03e 100644 --- a/arch/arm/mach-omap2/io.c +++ b/arch/arm/mach-omap2/io.c @@ -359,6 +359,7 @@ static void __init omap_hwmod_init_postsetup(void) omap_pm_if_early_init(); } +#ifdef CONFIG_ARCH_OMAP2 void __init omap2420_init_early(void) { omap2_set_globals_242x(); @@ -382,11 +383,13 @@ void __init omap2430_init_early(void) omap_hwmod_init_postsetup(); omap2430_clk_init(); } +#endif /* * Currently only board-omap3beagle.c should call this because of the * same machine_id for 34xx and 36xx beagle.. Will get fixed with DT. */ +#ifdef CONFIG_ARCH_OMAP3 void __init omap3_init_early(void) { omap2_set_globals_3xxx(); @@ -430,7 +433,9 @@ void __init ti816x_init_early(void) omap_hwmod_init_postsetup(); omap3xxx_clk_init(); } +#endif +#ifdef CONFIG_ARCH_OMAP4 void __init omap4430_init_early(void) { omap2_set_globals_443x(); @@ -442,6 +447,7 @@ void __init omap4430_init_early(void) omap_hwmod_init_postsetup(); omap4xxx_clk_init(); } +#endif void __init omap_sdrc_init(struct omap_sdrc_params *sdrc_cs0, struct omap_sdrc_params *sdrc_cs1) diff --git a/arch/arm/mach-omap2/omap_hwmod.c b/arch/arm/mach-omap2/omap_hwmod.c index d7138070508..6b3088db83b 100644 --- a/arch/arm/mach-omap2/omap_hwmod.c +++ b/arch/arm/mach-omap2/omap_hwmod.c @@ -2625,7 +2625,7 @@ ohsps_unlock: * Returns the context loss count of the powerdomain assocated with @oh * upon success, or zero if no powerdomain exists for @oh. */ -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh) { struct powerdomain *pwrdm; int ret = 0; diff --git a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c index 3008e1672c7..bc9035ec87f 100644 --- a/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c +++ b/arch/arm/mach-omap2/omap_hwmod_3xxx_data.c @@ -3159,7 +3159,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_mmc2_hwmod, &omap3xxx_mmc3_hwmod, &omap3xxx_mpu_hwmod, - &omap3xxx_iva_hwmod, &omap3xxx_timer1_hwmod, &omap3xxx_timer2_hwmod, @@ -3188,8 +3187,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_i2c1_hwmod, &omap3xxx_i2c2_hwmod, &omap3xxx_i2c3_hwmod, - &omap34xx_sr1_hwmod, - &omap34xx_sr2_hwmod, /* gpio class */ &omap3xxx_gpio1_hwmod, @@ -3211,8 +3208,6 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { &omap3xxx_mcbsp2_sidetone_hwmod, &omap3xxx_mcbsp3_sidetone_hwmod, - /* mailbox class */ - &omap3xxx_mailbox_hwmod, /* mcspi class */ &omap34xx_mcspi1, @@ -3225,31 +3220,39 @@ static __initdata struct omap_hwmod *omap3xxx_hwmods[] = { /* 3430ES1-only hwmods */ static __initdata struct omap_hwmod *omap3430es1_hwmods[] = { + &omap3xxx_iva_hwmod, &omap3430es1_dss_core_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; /* 3430ES2+-only hwmods */ static __initdata struct omap_hwmod *omap3430es2plus_hwmods[] = { + &omap3xxx_iva_hwmod, &omap3xxx_dss_core_hwmod, &omap3xxx_usbhsotg_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; /* 34xx-only hwmods (all ES revisions) */ static __initdata struct omap_hwmod *omap34xx_hwmods[] = { + &omap3xxx_iva_hwmod, &omap34xx_sr1_hwmod, &omap34xx_sr2_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; /* 36xx-only hwmods (all ES revisions) */ static __initdata struct omap_hwmod *omap36xx_hwmods[] = { + &omap3xxx_iva_hwmod, &omap3xxx_uart4_hwmod, &omap3xxx_dss_core_hwmod, &omap36xx_sr1_hwmod, &omap36xx_sr2_hwmod, &omap3xxx_usbhsotg_hwmod, + &omap3xxx_mailbox_hwmod, NULL }; @@ -3267,7 +3270,7 @@ int __init omap3xxx_hwmod_init(void) /* Register hwmods common to all OMAP3 */ r = omap_hwmod_register(omap3xxx_hwmods); - if (!r) + if (r < 0) return r; rev = omap_rev(); @@ -3292,7 +3295,7 @@ int __init omap3xxx_hwmod_init(void) }; r = omap_hwmod_register(h); - if (!r) + if (r < 0) return r; /* diff --git a/arch/arm/mach-omap2/omap_l3_noc.c b/arch/arm/mach-omap2/omap_l3_noc.c index c8b1bef92e5..6a66aa5e2a5 100644 --- a/arch/arm/mach-omap2/omap_l3_noc.c +++ b/arch/arm/mach-omap2/omap_l3_noc.c @@ -20,6 +20,7 @@ * Foundation, Inc., 59 Temple Place, Suite 330, Boston, MA 02111-1307 * USA */ +#include <linux/module.h> #include <linux/init.h> #include <linux/io.h> #include <linux/platform_device.h> diff --git a/arch/arm/mach-omap2/pm34xx.c b/arch/arm/mach-omap2/pm34xx.c index c8cbd00a41a..efa66494c1e 100644 --- a/arch/arm/mach-omap2/pm34xx.c +++ b/arch/arm/mach-omap2/pm34xx.c @@ -99,31 +99,27 @@ static void omap3_enable_io_chain(void) { int timeout = 0; - if (omap_rev() >= OMAP3430_REV_ES3_1) { - omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); - /* Do a readback to assure write has been done */ - omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); + omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); + /* Do a readback to assure write has been done */ + omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN); - while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) & - OMAP3430_ST_IO_CHAIN_MASK)) { - timeout++; - if (timeout > 1000) { - printk(KERN_ERR "Wake up daisy chain " - "activation failed.\n"); - return; - } - omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, - WKUP_MOD, PM_WKEN); + while (!(omap2_prm_read_mod_reg(WKUP_MOD, PM_WKEN) & + OMAP3430_ST_IO_CHAIN_MASK)) { + timeout++; + if (timeout > 1000) { + pr_err("Wake up daisy chain activation failed.\n"); + return; } + omap2_prm_set_mod_reg_bits(OMAP3430_ST_IO_CHAIN_MASK, + WKUP_MOD, PM_WKEN); } } static void omap3_disable_io_chain(void) { - if (omap_rev() >= OMAP3430_REV_ES3_1) - omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, - PM_WKEN); + omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_CHAIN_MASK, WKUP_MOD, + PM_WKEN); } static void omap3_core_save_context(void) @@ -363,7 +359,6 @@ void omap_sram_idle(void) printk(KERN_ERR "Invalid mpu state in sram_idle\n"); return; } - pwrdm_pre_transition(); /* NEON control */ if (pwrdm_read_pwrst(neon_pwrdm) == PWRDM_POWER_ON) @@ -376,7 +371,8 @@ void omap_sram_idle(void) (per_next_state < PWRDM_POWER_ON || core_next_state < PWRDM_POWER_ON)) { omap2_prm_set_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - omap3_enable_io_chain(); + if (omap3_has_io_chain_ctrl()) + omap3_enable_io_chain(); } /* Block console output in case it is on one of the OMAP UARTs */ @@ -386,6 +382,8 @@ void omap_sram_idle(void) if (!console_trylock()) goto console_still_active; + pwrdm_pre_transition(); + /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_going_off = (per_next_state == PWRDM_POWER_OFF) ? 1 : 0; @@ -409,13 +407,14 @@ void omap_sram_idle(void) omap3_intc_prepare_idle(); /* - * On EMU/HS devices ROM code restores a SRDC value - * from scratchpad which has automatic self refresh on timeout - * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443. - * Hence store/restore the SDRC_POWER register here. - */ - if (omap_rev() >= OMAP3430_REV_ES3_0 && - omap_type() != OMAP2_DEVICE_TYPE_GP && + * On EMU/HS devices ROM code restores a SRDC value + * from scratchpad which has automatic self refresh on timeout + * of AUTO_CNT = 1 enabled. This takes care of erratum ID i443. + * Hence store/restore the SDRC_POWER register here. + */ + if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 && + (omap_type() == OMAP2_DEVICE_TYPE_EMU || + omap_type() == OMAP2_DEVICE_TYPE_SEC) && core_next_state == PWRDM_POWER_OFF) sdrc_pwr = sdrc_read_reg(SDRC_POWER); @@ -432,8 +431,9 @@ void omap_sram_idle(void) omap34xx_do_sram_idle(save_state); /* Restore normal SDRC POWER settings */ - if (omap_rev() >= OMAP3430_REV_ES3_0 && - omap_type() != OMAP2_DEVICE_TYPE_GP && + if (cpu_is_omap3430() && omap_rev() >= OMAP3430_REV_ES3_0 && + (omap_type() == OMAP2_DEVICE_TYPE_EMU || + omap_type() == OMAP2_DEVICE_TYPE_SEC) && core_next_state == PWRDM_POWER_OFF) sdrc_write_reg(sdrc_pwr, SDRC_POWER); @@ -455,6 +455,8 @@ void omap_sram_idle(void) } omap3_intc_resume_idle(); + pwrdm_post_transition(); + /* PER */ if (per_next_state < PWRDM_POWER_ON) { per_prev_state = pwrdm_read_prev_pwrst(per_pwrdm); @@ -475,11 +477,10 @@ console_still_active: core_next_state < PWRDM_POWER_ON)) { omap2_prm_clear_mod_reg_bits(OMAP3430_EN_IO_MASK, WKUP_MOD, PM_WKEN); - omap3_disable_io_chain(); + if (omap3_has_io_chain_ctrl()) + omap3_disable_io_chain(); } - pwrdm_post_transition(); - clkdm_allow_idle(mpu_pwrdm->pwrdm_clkdms[0]); } @@ -870,6 +871,9 @@ static int __init omap3_pm_init(void) if (!cpu_is_omap34xx()) return -ENODEV; + if (!omap3_has_io_chain_ctrl()) + pr_warning("PM: no software I/O chain control; some wakeups may be lost\n"); + pm_errata_configure(); /* XXX prcm_setup_regs needs to be before enabling hw diff --git a/arch/arm/mach-omap2/powerdomain.c b/arch/arm/mach-omap2/powerdomain.c index 5164d587ef5..8a18d1bd61c 100644 --- a/arch/arm/mach-omap2/powerdomain.c +++ b/arch/arm/mach-omap2/powerdomain.c @@ -1002,16 +1002,16 @@ int pwrdm_post_transition(void) * @pwrdm: struct powerdomain * to wait for * * Context loss count is the sum of powerdomain off-mode counter, the - * logic off counter and the per-bank memory off counter. Returns 0 + * logic off counter and the per-bank memory off counter. Returns negative * (and WARNs) upon error, otherwise, returns the context loss count. */ -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm) +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm) { int i, count; if (!pwrdm) { WARN(1, "powerdomain: %s: pwrdm is null\n", __func__); - return 0; + return -ENODEV; } count = pwrdm->state_counter[PWRDM_POWER_OFF]; @@ -1020,7 +1020,13 @@ u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm) for (i = 0; i < pwrdm->banks; i++) count += pwrdm->ret_mem_off_counter[i]; - pr_debug("powerdomain: %s: context loss count = %u\n", + /* + * Context loss count has to be a non-negative value. Clear the sign + * bit to get a value range from 0 to INT_MAX. + */ + count &= INT_MAX; + + pr_debug("powerdomain: %s: context loss count = %d\n", pwrdm->name, count); return count; diff --git a/arch/arm/mach-omap2/powerdomain.h b/arch/arm/mach-omap2/powerdomain.h index 42e6dd8f2a7..0d72a8a8ce4 100644 --- a/arch/arm/mach-omap2/powerdomain.h +++ b/arch/arm/mach-omap2/powerdomain.h @@ -217,7 +217,7 @@ int pwrdm_clkdm_state_switch(struct clockdomain *clkdm); int pwrdm_pre_transition(void); int pwrdm_post_transition(void); int pwrdm_set_lowpwrstchange(struct powerdomain *pwrdm); -u32 pwrdm_get_context_loss_count(struct powerdomain *pwrdm); +int pwrdm_get_context_loss_count(struct powerdomain *pwrdm); bool pwrdm_can_ever_lose_context(struct powerdomain *pwrdm); extern void omap242x_powerdomains_init(void); diff --git a/arch/arm/mach-omap2/timer.c b/arch/arm/mach-omap2/timer.c index e49fc7be222..037b0d7d4e0 100644 --- a/arch/arm/mach-omap2/timer.c +++ b/arch/arm/mach-omap2/timer.c @@ -408,14 +408,6 @@ static int omap2_dm_timer_set_src(struct platform_device *pdev, int source) return ret; } -struct omap_device_pm_latency omap2_dmtimer_latency[] = { - { - .deactivate_func = omap_device_idle_hwmods, - .activate_func = omap_device_enable_hwmods, - .flags = OMAP_DEVICE_LATENCY_AUTO_ADJUST, - }, -}; - /** * omap_timer_init - build and register timer device with an * associated timer hwmod @@ -477,9 +469,7 @@ static int __init omap_timer_init(struct omap_hwmod *oh, void *unused) pdata->get_context_loss_count = omap_pm_get_dev_context_loss_count; #endif pdev = omap_device_build(name, id, oh, pdata, sizeof(*pdata), - omap2_dmtimer_latency, - ARRAY_SIZE(omap2_dmtimer_latency), - 0); + NULL, 0, 0); if (IS_ERR(pdev)) { pr_err("%s: Can't build omap_device for %s: %s.\n", diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 47fb5d60763..267975086a7 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -60,44 +60,6 @@ static struct musb_hdrc_platform_data musb_plat = { static u64 musb_dmamask = DMA_BIT_MASK(32); -static void usb_musb_mux_init(struct omap_musb_board_data *board_data) -{ - switch (board_data->interface_type) { - case MUSB_INTERFACE_UTMI: - omap_mux_init_signal("usba0_otg_dp", OMAP_PIN_INPUT); - omap_mux_init_signal("usba0_otg_dm", OMAP_PIN_INPUT); - break; - case MUSB_INTERFACE_ULPI: - omap_mux_init_signal("usba0_ulpiphy_clk", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_stp", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dir", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_nxt", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat0", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat1", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat2", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat3", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat4", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat5", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat6", - OMAP_PIN_INPUT_PULLDOWN); - omap_mux_init_signal("usba0_ulpiphy_dat7", - OMAP_PIN_INPUT_PULLDOWN); - break; - default: - break; - } -} - static struct omap_musb_board_data musb_default_board_data = { .interface_type = MUSB_INTERFACE_ULPI, .mode = MUSB_OTG, diff --git a/arch/arm/plat-omap/dmtimer.c b/arch/arm/plat-omap/dmtimer.c index 2def4e1990e..af3b92be845 100644 --- a/arch/arm/plat-omap/dmtimer.c +++ b/arch/arm/plat-omap/dmtimer.c @@ -35,6 +35,7 @@ * 675 Mass Ave, Cambridge, MA 02139, USA. */ +#include <linux/module.h> #include <linux/io.h> #include <linux/slab.h> #include <linux/err.h> diff --git a/arch/arm/plat-omap/i2c.c b/arch/arm/plat-omap/i2c.c index 679cbd49c01..db071bc71c4 100644 --- a/arch/arm/plat-omap/i2c.c +++ b/arch/arm/plat-omap/i2c.c @@ -184,7 +184,7 @@ static inline int omap2_i2c_add_bus(int bus_id) NULL, 0, 0); WARN(IS_ERR(pdev), "Could not build omap_device for %s\n", name); - return PTR_ERR(pdev); + return PTR_RET(pdev); } #else static inline int omap2_i2c_add_bus(int bus_id) diff --git a/arch/arm/plat-omap/include/plat/cpu.h b/arch/arm/plat-omap/include/plat/cpu.h index 2f902694222..408a12f7920 100644 --- a/arch/arm/plat-omap/include/plat/cpu.h +++ b/arch/arm/plat-omap/include/plat/cpu.h @@ -399,6 +399,13 @@ void omap2_check_revision(void); /* * Runtime detection of OMAP3 features + * + * OMAP3_HAS_IO_CHAIN_CTRL: Some later members of the OMAP3 chip + * family have OS-level control over the I/O chain clock. This is + * to avoid a window during which wakeups could potentially be lost + * during powerdomain transitions. If this bit is set, it + * indicates that the chip does support OS-level control of this + * feature. */ extern u32 omap_features; @@ -410,9 +417,10 @@ extern u32 omap_features; #define OMAP3_HAS_192MHZ_CLK BIT(5) #define OMAP3_HAS_IO_WAKEUP BIT(6) #define OMAP3_HAS_SDRC BIT(7) -#define OMAP4_HAS_MPU_1GHZ BIT(8) -#define OMAP4_HAS_MPU_1_2GHZ BIT(9) -#define OMAP4_HAS_MPU_1_5GHZ BIT(10) +#define OMAP3_HAS_IO_CHAIN_CTRL BIT(8) +#define OMAP4_HAS_MPU_1GHZ BIT(9) +#define OMAP4_HAS_MPU_1_2GHZ BIT(10) +#define OMAP4_HAS_MPU_1_5GHZ BIT(11) #define OMAP3_HAS_FEATURE(feat,flag) \ @@ -429,12 +437,11 @@ OMAP3_HAS_FEATURE(isp, ISP) OMAP3_HAS_FEATURE(192mhz_clk, 192MHZ_CLK) OMAP3_HAS_FEATURE(io_wakeup, IO_WAKEUP) OMAP3_HAS_FEATURE(sdrc, SDRC) +OMAP3_HAS_FEATURE(io_chain_ctrl, IO_CHAIN_CTRL) /* * Runtime detection of OMAP4 features */ -extern u32 omap_features; - #define OMAP4_HAS_FEATURE(feat, flag) \ static inline unsigned int omap4_has_ ##feat(void) \ { \ diff --git a/arch/arm/plat-omap/include/plat/dmtimer.h b/arch/arm/plat-omap/include/plat/dmtimer.h index d11025e6e7a..9418f00b6c3 100644 --- a/arch/arm/plat-omap/include/plat/dmtimer.h +++ b/arch/arm/plat-omap/include/plat/dmtimer.h @@ -104,7 +104,7 @@ struct dmtimer_platform_data { bool loses_context; - u32 (*get_context_loss_count)(struct device *dev); + int (*get_context_loss_count)(struct device *dev); }; struct omap_dm_timer *omap_dm_timer_request(void); @@ -279,7 +279,7 @@ struct omap_dm_timer { struct platform_device *pdev; struct list_head node; - u32 (*get_context_loss_count)(struct device *dev); + int (*get_context_loss_count)(struct device *dev); }; int omap_dm_timer_prepare(struct omap_dm_timer *timer); diff --git a/arch/arm/plat-omap/include/plat/omap-alsa.h b/arch/arm/plat-omap/include/plat/omap-alsa.h deleted file mode 100644 index b53055b390d..00000000000 --- a/arch/arm/plat-omap/include/plat/omap-alsa.h +++ /dev/null @@ -1,123 +0,0 @@ -/* - * arch/arm/plat-omap/include/mach/omap-alsa.h - * - * Alsa Driver for AIC23 and TSC2101 codecs on OMAP platform boards. - * - * Copyright (C) 2006 Mika Laitio <lamikr@cc.jyu.fi> - * - * Copyright (C) 2005 Instituto Nokia de Tecnologia - INdT - Manaus Brazil - * Written by Daniel Petrini, David Cohen, Anderson Briglia - * {daniel.petrini, david.cohen, anderson.briglia}@indt.org.br - * - * This program is free software; you can redistribute it and/or modify it - * under the terms of the GNU General Public License as published by the - * Free Software Foundation; either version 2 of the License, or (at your - * option) any later version. - * - * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED - * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF - * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN - * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, - * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT - * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF - * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON - * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT - * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF - * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. - * - * You should have received a copy of the GNU General Public License along - * with this program; if not, write to the Free Software Foundation, Inc., - * 675 Mass Ave, Cambridge, MA 02139, USA. - * - * History - * ------- - * - * 2005/07/25 INdT-10LE Kernel Team - Alsa driver for omap osk, - * original version based in sa1100 driver - * and omap oss driver. - */ - -#ifndef __OMAP_ALSA_H -#define __OMAP_ALSA_H - -#include <plat/dma.h> -#include <sound/core.h> -#include <sound/pcm.h> -#include <plat/mcbsp.h> -#include <linux/platform_device.h> - -#define DMA_BUF_SIZE (1024 * 8) - -/* - * Buffer management for alsa and dma - */ -struct audio_stream { - char *id; /* identification string */ - int stream_id; /* numeric identification */ - int dma_dev; /* dma number of that device */ - int *lch; /* Chain of channels this stream is linked to */ - char started; /* to store if the chain was started or not */ - int dma_q_head; /* DMA Channel Q Head */ - int dma_q_tail; /* DMA Channel Q Tail */ - char dma_q_count; /* DMA Channel Q Count */ - int active:1; /* we are using this stream for transfer now */ - int period; /* current transfer period */ - int periods; /* current count of periods registerd in the DMA engine */ - spinlock_t dma_lock; /* for locking in DMA operations */ - struct snd_pcm_substream *stream; /* the pcm stream */ - unsigned linked:1; /* dma channels linked */ - int offset; /* store start position of the last period in the alsa buffer */ - int (*hw_start)(void); /* interface to start HW interface, e.g. McBSP */ - int (*hw_stop)(void); /* interface to stop HW interface, e.g. McBSP */ -}; - -/* - * Alsa card structure for aic23 - */ -struct snd_card_omap_codec { - struct snd_card *card; - struct snd_pcm *pcm; - long samplerate; - struct audio_stream s[2]; /* playback & capture */ -}; - -/* Codec specific information and function pointers. - * Codec (omap-alsa-aic23.c and omap-alsa-tsc2101.c) - * are responsible for defining the function pointers. - */ -struct omap_alsa_codec_config { - char *name; - struct omap_mcbsp_reg_cfg *mcbsp_regs_alsa; - struct snd_pcm_hw_constraint_list *hw_constraints_rates; - struct snd_pcm_hardware *snd_omap_alsa_playback; - struct snd_pcm_hardware *snd_omap_alsa_capture; - void (*codec_configure_dev)(void); - void (*codec_set_samplerate)(long); - void (*codec_clock_setup)(void); - int (*codec_clock_on)(void); - int (*codec_clock_off)(void); - int (*get_default_samplerate)(void); -}; - -/*********** Mixer function prototypes *************************/ -int snd_omap_mixer(struct snd_card_omap_codec *); -void snd_omap_init_mixer(void); - -#ifdef CONFIG_PM -void snd_omap_suspend_mixer(void); -void snd_omap_resume_mixer(void); -#endif - -int snd_omap_alsa_post_probe(struct platform_device *pdev, struct omap_alsa_codec_config *config); -int snd_omap_alsa_remove(struct platform_device *pdev); -#ifdef CONFIG_PM -int snd_omap_alsa_suspend(struct platform_device *pdev, pm_message_t state); -int snd_omap_alsa_resume(struct platform_device *pdev); -#else -#define snd_omap_alsa_suspend NULL -#define snd_omap_alsa_resume NULL -#endif - -void callback_omap_alsa_sound_dma(void *); - -#endif diff --git a/arch/arm/plat-omap/include/plat/omap-pm.h b/arch/arm/plat-omap/include/plat/omap-pm.h index 0840df813f4..67faa7b8fe9 100644 --- a/arch/arm/plat-omap/include/plat/omap-pm.h +++ b/arch/arm/plat-omap/include/plat/omap-pm.h @@ -342,9 +342,9 @@ unsigned long omap_pm_cpu_get_freq(void); * driver must restore device context. If the number of context losses * exceeds the maximum positive integer, the function will wrap to 0 and * continue counting. Returns the number of context losses for this device, - * or zero upon error. + * or negative value upon error. */ -u32 omap_pm_get_dev_context_loss_count(struct device *dev); +int omap_pm_get_dev_context_loss_count(struct device *dev); void omap_pm_enable_off_mode(void); void omap_pm_disable_off_mode(void); diff --git a/arch/arm/plat-omap/include/plat/omap_device.h b/arch/arm/plat-omap/include/plat/omap_device.h index 12c5b0c345b..51423d2727a 100644 --- a/arch/arm/plat-omap/include/plat/omap_device.h +++ b/arch/arm/plat-omap/include/plat/omap_device.h @@ -107,7 +107,7 @@ struct device *omap_device_get_by_hwmod_name(const char *oh_name); int omap_device_align_pm_lat(struct platform_device *pdev, u32 new_wakeup_lat_limit); struct powerdomain *omap_device_get_pwrdm(struct omap_device *od); -u32 omap_device_get_context_loss_count(struct platform_device *pdev); +int omap_device_get_context_loss_count(struct platform_device *pdev); /* Other */ diff --git a/arch/arm/plat-omap/include/plat/omap_hwmod.h b/arch/arm/plat-omap/include/plat/omap_hwmod.h index 5419f1a2aaa..8b372ede17c 100644 --- a/arch/arm/plat-omap/include/plat/omap_hwmod.h +++ b/arch/arm/plat-omap/include/plat/omap_hwmod.h @@ -600,7 +600,7 @@ int omap_hwmod_for_each_by_class(const char *classname, void *user); int omap_hwmod_set_postsetup_state(struct omap_hwmod *oh, u8 state); -u32 omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); +int omap_hwmod_get_context_loss_count(struct omap_hwmod *oh); int omap_hwmod_no_setup_reset(struct omap_hwmod *oh); diff --git a/arch/arm/plat-omap/omap-pm-noop.c b/arch/arm/plat-omap/omap-pm-noop.c index b0471bb2d47..3dc3801aace 100644 --- a/arch/arm/plat-omap/omap-pm-noop.c +++ b/arch/arm/plat-omap/omap-pm-noop.c @@ -27,7 +27,7 @@ #include <plat/omap_device.h> static bool off_mode_enabled; -static u32 dummy_context_loss_counter; +static int dummy_context_loss_counter; /* * Device-driver-originated constraints (via board-*.c files) @@ -311,22 +311,32 @@ void omap_pm_disable_off_mode(void) #ifdef CONFIG_ARCH_OMAP2PLUS -u32 omap_pm_get_dev_context_loss_count(struct device *dev) +int omap_pm_get_dev_context_loss_count(struct device *dev) { struct platform_device *pdev = to_platform_device(dev); - u32 count; + int count; if (WARN_ON(!dev)) - return 0; + return -ENODEV; if (dev->parent == &omap_device_parent) { count = omap_device_get_context_loss_count(pdev); } else { WARN_ONCE(off_mode_enabled, "omap_pm: using dummy context loss counter; device %s should be converted to omap_device", dev_name(dev)); - if (off_mode_enabled) - dummy_context_loss_counter++; + count = dummy_context_loss_counter; + + if (off_mode_enabled) { + count++; + /* + * Context loss count has to be a non-negative value. + * Clear the sign bit to get a value range from 0 to + * INT_MAX. + */ + count &= INT_MAX; + dummy_context_loss_counter = count; + } } pr_debug("OMAP PM: context loss count for dev %s = %d\n", @@ -337,7 +347,7 @@ u32 omap_pm_get_dev_context_loss_count(struct device *dev) #else -u32 omap_pm_get_dev_context_loss_count(struct device *dev) +int omap_pm_get_dev_context_loss_count(struct device *dev) { return dummy_context_loss_counter; } diff --git a/arch/arm/plat-omap/omap_device.c b/arch/arm/plat-omap/omap_device.c index f839f948421..e8d98693d2d 100644 --- a/arch/arm/plat-omap/omap_device.c +++ b/arch/arm/plat-omap/omap_device.c @@ -427,7 +427,7 @@ static int _omap_device_notifier_call(struct notifier_block *nb, * return the context loss counter for that hwmod, otherwise return * zero. */ -u32 omap_device_get_context_loss_count(struct platform_device *pdev) +int omap_device_get_context_loss_count(struct platform_device *pdev) { struct omap_device *od; u32 ret = 0; |