diff options
| -rw-r--r-- | arch/arm/mach-omap2/cclock44xx_data.c | 22 |
1 files changed, 22 insertions, 0 deletions
diff --git a/arch/arm/mach-omap2/cclock44xx_data.c b/arch/arm/mach-omap2/cclock44xx_data.c index 44ef54fa118..30da1ad7ec8 100644 --- a/arch/arm/mach-omap2/cclock44xx_data.c +++ b/arch/arm/mach-omap2/cclock44xx_data.c @@ -40,6 +40,14 @@ #define OMAP4430_MODULEMODE_HWCTRL_SHIFT 0 #define OMAP4430_MODULEMODE_SWCTRL_SHIFT 1 +/* + * OMAP4 ABE DPLL default frequency. In OMAP4460 TRM version V, section + * "3.6.3.2.3 CM1_ABE Clock Generator" states that the "DPLL_ABE_X2_CLK + * must be set to 196.608 MHz" and hence, the DPLL locked frequency is + * half of this value. + */ +#define OMAP4_DPLL_ABE_DEFFREQ 98304000 + /* Root clocks */ DEFINE_CLK_FIXED_RATE(extalt_clkin_ck, CLK_IS_ROOT, 59000000, 0x0); @@ -1966,6 +1974,7 @@ int __init omap4xxx_clk_init(void) { u32 cpu_clkflg; struct omap_clk *c; + int rc; if (cpu_is_omap443x()) { cpu_mask = RATE_IN_4430; @@ -1994,5 +2003,18 @@ int __init omap4xxx_clk_init(void) omap2_clk_enable_init_clocks(enable_init_clks, ARRAY_SIZE(enable_init_clks)); + /* + * On OMAP4460 the ABE DPLL fails to turn on if in idle low-power + * state when turning the ABE clock domain. Workaround this by + * locking the ABE DPLL on boot. + */ + if (cpu_is_omap446x()) { + rc = clk_set_parent(&abe_dpll_refclk_mux_ck, &sys_32k_ck); + if (!rc) + rc = clk_set_rate(&dpll_abe_ck, OMAP4_DPLL_ABE_DEFFREQ); + if (rc) + pr_err("%s: failed to configure ABE DPLL!\n", __func__); + } + return 0; } |