diff options
| -rw-r--r-- | arch/arm/mach-omap2/board-2430sdp.c | 7 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-3430sdp.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-cm-t35.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-devkit8000.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-igep0020.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-igep0030.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-ldp.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3beagle.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3pandora.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3stalker.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-omap3touchbook.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-overo.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-rm680.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/board-zoom-peripherals.c | 8 | ||||
| -rw-r--r-- | arch/arm/mach-omap2/usb-musb.c | 14 | 
15 files changed, 27 insertions, 98 deletions
diff --git a/arch/arm/mach-omap2/board-2430sdp.c b/arch/arm/mach-omap2/board-2430sdp.c index 99b3f2de21f..a8810f83a57 100644 --- a/arch/arm/mach-omap2/board-2430sdp.c +++ b/arch/arm/mach-omap2/board-2430sdp.c @@ -208,11 +208,6 @@ static struct omap2_hsmmc_info mmc[] __initdata = {  	{}	/* Terminator */  }; -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -};  static struct omap_usb_config sdp2430_usb_config __initdata = {  	.otg		= 1,  #ifdef  CONFIG_USB_GADGET_OMAP @@ -246,7 +241,7 @@ static void __init omap_2430sdp_init(void)  	omap2_usbfs_init(&sdp2430_usb_config);  	omap_mux_init_signal("usb0hs_stp", OMAP_PULL_ENA | OMAP_PULL_UP); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	board_smc91x_init(); diff --git a/arch/arm/mach-omap2/board-3430sdp.c b/arch/arm/mach-omap2/board-3430sdp.c index b12400e2c49..951e5857ad3 100644 --- a/arch/arm/mach-omap2/board-3430sdp.c +++ b/arch/arm/mach-omap2/board-3430sdp.c @@ -810,12 +810,6 @@ static struct flash_partitions sdp_flash_partitions[] = {  	},  }; -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static void __init omap_3430sdp_init(void)  {  	int gpio_pendown; @@ -832,7 +826,7 @@ static void __init omap_3430sdp_init(void)  		gpio_pendown = SDP3430_TS_GPIO_IRQ_SDPV1;  	omap_ads7846_init(1, gpio_pendown, 310, NULL);  	board_serial_init(); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	board_smc91x_init();  	board_flash_init(sdp_flash_partitions, chip_sel_3430, 0);  	sdp3430_display_init(); diff --git a/arch/arm/mach-omap2/board-cm-t35.c b/arch/arm/mach-omap2/board-cm-t35.c index 948161d3998..e0e2d483800 100644 --- a/arch/arm/mach-omap2/board-cm-t35.c +++ b/arch/arm/mach-omap2/board-cm-t35.c @@ -653,12 +653,6 @@ static struct omap_board_mux board_mux[] __initdata = {  };  #endif -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static struct omap_board_config_kernel cm_t35_config[] __initdata = {  }; @@ -675,7 +669,7 @@ static void __init cm_t35_init(void)  	cm_t35_init_led();  	cm_t35_init_display(); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  } diff --git a/arch/arm/mach-omap2/board-devkit8000.c b/arch/arm/mach-omap2/board-devkit8000.c index e7dc057600d..405542af6ca 100644 --- a/arch/arm/mach-omap2/board-devkit8000.c +++ b/arch/arm/mach-omap2/board-devkit8000.c @@ -509,12 +509,6 @@ static struct platform_device *devkit8000_devices[] __initdata = {  	&omap_dm9000_dev,  }; -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static const struct usbhs_omap_board_data usbhs_bdata __initconst = {  	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY, @@ -698,7 +692,7 @@ static void __init devkit8000_init(void)  	omap_ads7846_init(2, OMAP3_DEVKIT_TS_GPIO, 0, NULL); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  	omap_nand_flash_init(NAND_BUSWIDTH_16, devkit8000_nand_partitions,  			     ARRAY_SIZE(devkit8000_nand_partitions)); diff --git a/arch/arm/mach-omap2/board-igep0020.c b/arch/arm/mach-omap2/board-igep0020.c index a0fd10e42b3..2c9a9197d2b 100644 --- a/arch/arm/mach-omap2/board-igep0020.c +++ b/arch/arm/mach-omap2/board-igep0020.c @@ -559,12 +559,6 @@ static void __init igep2_i2c_init(void)  		pr_warning("IGEP2: Could not register I2C3 bus (%d)\n", ret);  } -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static const struct usbhs_omap_board_data usbhs_bdata __initconst = {  	.port_mode[0] = OMAP_EHCI_PORT_MODE_PHY,  	.port_mode[1] = OMAP_USBHS_PORT_MODE_UNUSED, @@ -637,7 +631,7 @@ static void __init igep2_init(void)  	platform_add_devices(igep2_devices, ARRAY_SIZE(igep2_devices));  	omap_display_init(&igep2_dss_data);  	omap_serial_init(); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  	igep2_flash_init(); diff --git a/arch/arm/mach-omap2/board-igep0030.c b/arch/arm/mach-omap2/board-igep0030.c index a831e854945..512a7eb9c2d 100644 --- a/arch/arm/mach-omap2/board-igep0030.c +++ b/arch/arm/mach-omap2/board-igep0030.c @@ -357,12 +357,6 @@ static int __init igep3_i2c_init(void)  	return 0;  } -static struct omap_musb_board_data musb_board_data = { -	.interface_type	= MUSB_INTERFACE_ULPI, -	.mode		= MUSB_OTG, -	.power		= 100, -}; -  #if defined(CONFIG_LIBERTAS_SDIO) || defined(CONFIG_LIBERTAS_SDIO_MODULE)  static void __init igep3_wifi_bt_init(void) @@ -424,7 +418,7 @@ static void __init igep3_init(void)  	igep3_i2c_init();  	platform_add_devices(igep3_devices, ARRAY_SIZE(igep3_devices));  	omap_serial_init(); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  	igep3_flash_init(); diff --git a/arch/arm/mach-omap2/board-ldp.c b/arch/arm/mach-omap2/board-ldp.c index 7482c7531ed..f7d6038075f 100644 --- a/arch/arm/mach-omap2/board-ldp.c +++ b/arch/arm/mach-omap2/board-ldp.c @@ -294,12 +294,6 @@ static struct omap_board_mux board_mux[] __initdata = {  };  #endif -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static struct mtd_partition ldp_nand_partitions[] = {  	/* All the partition sizes are listed in terms of NAND block size */  	{ @@ -342,7 +336,7 @@ static void __init omap_ldp_init(void)  	platform_add_devices(ldp_devices, ARRAY_SIZE(ldp_devices));  	omap_ads7846_init(1, 54, 310, NULL);  	omap_serial_init(); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	board_nand_init(ldp_nand_partitions,  		ARRAY_SIZE(ldp_nand_partitions), ZOOM_NAND_CS, 0); diff --git a/arch/arm/mach-omap2/board-omap3beagle.c b/arch/arm/mach-omap2/board-omap3beagle.c index ce3bc2d1164..bc30ab092d1 100644 --- a/arch/arm/mach-omap2/board-omap3beagle.c +++ b/arch/arm/mach-omap2/board-omap3beagle.c @@ -551,12 +551,6 @@ static struct omap_board_mux board_mux[] __initdata = {  };  #endif -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static void __init beagle_opp_init(void)  {  	int r = 0; @@ -618,7 +612,7 @@ static void __init omap3_beagle_init(void)  	/* REVISIT leave DVI powered down until it's needed ... */  	gpio_direction_output(170, true); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3beagle_nand_partitions,  			     ARRAY_SIZE(omap3beagle_nand_partitions)); diff --git a/arch/arm/mach-omap2/board-omap3pandora.c b/arch/arm/mach-omap2/board-omap3pandora.c index b99cc642c5e..6c22d3f238e 100644 --- a/arch/arm/mach-omap2/board-omap3pandora.c +++ b/arch/arm/mach-omap2/board-omap3pandora.c @@ -633,12 +633,6 @@ static struct omap_board_mux board_mux[] __initdata = {  };  #endif -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static void __init omap3pandora_init(void)  {  	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -652,7 +646,7 @@ static void __init omap3pandora_init(void)  			ARRAY_SIZE(omap3pandora_spi_board_info));  	omap_ads7846_init(1, OMAP3_PANDORA_TS_GPIO, 0, NULL);  	usbhs_init(&usbhs_bdata); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	gpmc_nand_init(&pandora_nand_data);  	/* Ensure SDRC pins are mux'd for self-refresh */ diff --git a/arch/arm/mach-omap2/board-omap3stalker.c b/arch/arm/mach-omap2/board-omap3stalker.c index a1d550f8ba9..9981d06b726 100644 --- a/arch/arm/mach-omap2/board-omap3stalker.c +++ b/arch/arm/mach-omap2/board-omap3stalker.c @@ -526,12 +526,6 @@ static struct omap_board_mux board_mux[] __initdata = {  };  #endif -static struct omap_musb_board_data musb_board_data = { -	.interface_type	= MUSB_INTERFACE_ULPI, -	.mode		= MUSB_OTG, -	.power		= 100, -}; -  static void __init omap3_stalker_init(void)  {  	omap3_mux_init(board_mux, OMAP_PACKAGE_CUS); @@ -546,7 +540,7 @@ static void __init omap3_stalker_init(void)  	omap_display_init(&omap3_stalker_dss_data);  	omap_serial_init(); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  	omap_ads7846_init(1, OMAP3_STALKER_TS_GPIO, 310, NULL); diff --git a/arch/arm/mach-omap2/board-omap3touchbook.c b/arch/arm/mach-omap2/board-omap3touchbook.c index d770802900b..392278d9a88 100644 --- a/arch/arm/mach-omap2/board-omap3touchbook.c +++ b/arch/arm/mach-omap2/board-omap3touchbook.c @@ -421,12 +421,6 @@ static int __init early_touchbook_revision(char *p)  }  early_param("tbr", early_touchbook_revision); -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static void __init omap3_touchbook_init(void)  {  	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -447,7 +441,7 @@ static void __init omap3_touchbook_init(void)  	/* Touchscreen and accelerometer */  	omap_ads7846_init(4, OMAP3_TS_GPIO, 310, &ads7846_pdata); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  	omap_nand_flash_init(NAND_BUSWIDTH_16, omap3touchbook_nand_partitions,  			     ARRAY_SIZE(omap3touchbook_nand_partitions)); diff --git a/arch/arm/mach-omap2/board-overo.c b/arch/arm/mach-omap2/board-overo.c index 7ad2d7fea8d..e152c13ded7 100644 --- a/arch/arm/mach-omap2/board-overo.c +++ b/arch/arm/mach-omap2/board-overo.c @@ -553,12 +553,6 @@ static struct omap_board_mux board_mux[] __initdata = {  };  #endif -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static void __init overo_init(void)  {  	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB); @@ -567,7 +561,7 @@ static void __init overo_init(void)  	omap_serial_init();  	omap_nand_flash_init(0, overo_nand_partitions,  			     ARRAY_SIZE(overo_nand_partitions)); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	usbhs_init(&usbhs_bdata);  	overo_spi_init();  	overo_ads7846_init(); diff --git a/arch/arm/mach-omap2/board-rm680.c b/arch/arm/mach-omap2/board-rm680.c index 8e710ffaec6..42d10b12da3 100644 --- a/arch/arm/mach-omap2/board-rm680.c +++ b/arch/arm/mach-omap2/board-rm680.c @@ -144,17 +144,11 @@ static struct omap_board_mux board_mux[] __initdata = {  };  #endif -static struct omap_musb_board_data rm680_musb_data = { -	.interface_type	= MUSB_INTERFACE_ULPI, -	.mode		= MUSB_PERIPHERAL, -	.power		= 100, -}; -  static void __init rm680_init(void)  {  	omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);  	omap_serial_init(); -	usb_musb_init(&rm680_musb_data); +	usb_musb_init(NULL);  	rm680_peripherals_init();  } diff --git a/arch/arm/mach-omap2/board-zoom-peripherals.c b/arch/arm/mach-omap2/board-zoom-peripherals.c index e4870c20f19..489294a715c 100644 --- a/arch/arm/mach-omap2/board-zoom-peripherals.c +++ b/arch/arm/mach-omap2/board-zoom-peripherals.c @@ -363,12 +363,6 @@ static int __init omap_i2c_init(void)  	return 0;  } -static struct omap_musb_board_data musb_board_data = { -	.interface_type		= MUSB_INTERFACE_ULPI, -	.mode			= MUSB_OTG, -	.power			= 100, -}; -  static void enable_board_wakeup_source(void)  {  	/* T2 interrupt line (keypad) */ @@ -383,7 +377,7 @@ void __init zoom_peripherals_init(void)  	omap_i2c_init();  	platform_device_register(&omap_vwlan_device); -	usb_musb_init(&musb_board_data); +	usb_musb_init(NULL);  	enable_board_wakeup_source();  	omap_serial_init();  } diff --git a/arch/arm/mach-omap2/usb-musb.c b/arch/arm/mach-omap2/usb-musb.c index 35559f77e2d..dfa5a3cb5a1 100644 --- a/arch/arm/mach-omap2/usb-musb.c +++ b/arch/arm/mach-omap2/usb-musb.c @@ -108,7 +108,13 @@ static void usb_musb_mux_init(struct omap_musb_board_data *board_data)  	}  } -void __init usb_musb_init(struct omap_musb_board_data *board_data) +static struct omap_musb_board_data musb_default_board_data = { +	.interface_type		= MUSB_INTERFACE_ULPI, +	.mode			= MUSB_OTG, +	.power			= 100, +}; + +void __init usb_musb_init(struct omap_musb_board_data *musb_board_data)  {  	struct omap_hwmod		*oh;  	struct omap_device		*od; @@ -116,6 +122,12 @@ void __init usb_musb_init(struct omap_musb_board_data *board_data)  	struct device			*dev;  	int				bus_id = -1;  	const char			*oh_name, *name; +	struct omap_musb_board_data	*board_data; + +	if (musb_board_data) +		board_data = musb_board_data; +	else +		board_data = &musb_default_board_data;  	if (cpu_is_omap3517() || cpu_is_omap3505()) {  	} else if (cpu_is_omap44xx()) {  |