OMAP: omap4sdp: move display init from board file to dss-common.c

Device tree support for omapdss is still some way in the future.  In an
effort to get a minimal DSS support for DT enabled kernel on selected
OMAP4 boards, we'll go for a temporary solution: We will call the same
non-DT omapdss setup code for OMAP4 SDP and Pandaboards from
board-generic.c, thus enabling DSS for those boards.

This patch moves the display setup code from board-4430sdp.c to
dss-common.c. dss-common.c will be called by the board-4430sdp.c when
running on non-DT kernel, and by board-generic.c when running on DT
enabled kernel.

Signed-off-by: Tomi Valkeinen <tomi.valkeinen@ti.com>
Signed-off-by: Tony Lindgren <tony@atomide.com>

1 files changed, 172 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/dss-common.c b/arch/arm/mach-omap2/dss-common.c
index 62d7b15d1d2..679a0478644 100644
--- a/arch/arm/mach-omap2/dss-common.c
+++ b/arch/arm/mach-omap2/dss-common.c
@@ -24,8 +24,12 @@
  */
 
 #include <linux/kernel.h>
+#include <linux/gpio.h>
+
 #include <video/omapdss.h>
 #include <video/omap-panel-tfp410.h>
+#include <video/omap-panel-nokia-dsi.h>
+#include <video/omap-panel-picodlp.h>
 
 #include <plat/cpu.h>
 
@@ -102,3 +106,171 @@ void __init omap4_panda_display_init_of(void)
 {
 	omap_display_init(&omap4_panda_dss_data);
 }
+
+
+/* OMAP4 Blaze display data */
+
+#define DISPLAY_SEL_GPIO	59	/* LCD2/PicoDLP switch */
+#define DLP_POWER_ON_GPIO	40
+
+static struct nokia_dsi_panel_data dsi1_panel = {
+		.name		= "taal",
+		.reset_gpio	= 102,
+		.use_ext_te	= false,
+		.ext_te_gpio	= 101,
+		.esd_interval	= 0,
+		.pin_config = {
+			.num_pins	= 6,
+			.pins		= { 0, 1, 2, 3, 4, 5 },
+		},
+};
+
+static struct omap_dss_device sdp4430_lcd_device = {
+	.name			= "lcd",
+	.driver_name		= "taal",
+	.type			= OMAP_DISPLAY_TYPE_DSI,
+	.data			= &dsi1_panel,
+	.phy.dsi		= {
+		.module		= 0,
+	},
+	.channel		= OMAP_DSS_CHANNEL_LCD,
+};
+
+static struct nokia_dsi_panel_data dsi2_panel = {
+		.name		= "taal",
+		.reset_gpio	= 104,
+		.use_ext_te	= false,
+		.ext_te_gpio	= 103,
+		.esd_interval	= 0,
+		.pin_config = {
+			.num_pins	= 6,
+			.pins		= { 0, 1, 2, 3, 4, 5 },
+		},
+};
+
+static struct omap_dss_device sdp4430_lcd2_device = {
+	.name			= "lcd2",
+	.driver_name		= "taal",
+	.type			= OMAP_DISPLAY_TYPE_DSI,
+	.data			= &dsi2_panel,
+	.phy.dsi		= {
+
+		.module		= 1,
+	},
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+};
+
+static struct omap_dss_hdmi_data sdp4430_hdmi_data = {
+	.ct_cp_hpd_gpio = HDMI_GPIO_CT_CP_HPD,
+	.ls_oe_gpio = HDMI_GPIO_LS_OE,
+	.hpd_gpio = HDMI_GPIO_HPD,
+};
+
+static struct omap_dss_device sdp4430_hdmi_device = {
+	.name = "hdmi",
+	.driver_name = "hdmi_panel",
+	.type = OMAP_DISPLAY_TYPE_HDMI,
+	.channel = OMAP_DSS_CHANNEL_DIGIT,
+	.data = &sdp4430_hdmi_data,
+};
+
+static struct picodlp_panel_data sdp4430_picodlp_pdata = {
+	.picodlp_adapter_id	= 2,
+	.emu_done_gpio		= 44,
+	.pwrgood_gpio		= 45,
+};
+
+static void sdp4430_picodlp_init(void)
+{
+	int r;
+	const struct gpio picodlp_gpios[] = {
+		{DLP_POWER_ON_GPIO, GPIOF_OUT_INIT_LOW,
+			"DLP POWER ON"},
+		{sdp4430_picodlp_pdata.emu_done_gpio, GPIOF_IN,
+			"DLP EMU DONE"},
+		{sdp4430_picodlp_pdata.pwrgood_gpio, GPIOF_OUT_INIT_LOW,
+			"DLP PWRGOOD"},
+	};
+
+	r = gpio_request_array(picodlp_gpios, ARRAY_SIZE(picodlp_gpios));
+	if (r)
+		pr_err("Cannot request PicoDLP GPIOs, error %d\n", r);
+}
+
+static int sdp4430_panel_enable_picodlp(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DISPLAY_SEL_GPIO, 0);
+	gpio_set_value(DLP_POWER_ON_GPIO, 1);
+
+	return 0;
+}
+
+static void sdp4430_panel_disable_picodlp(struct omap_dss_device *dssdev)
+{
+	gpio_set_value(DLP_POWER_ON_GPIO, 0);
+	gpio_set_value(DISPLAY_SEL_GPIO, 1);
+}
+
+static struct omap_dss_device sdp4430_picodlp_device = {
+	.name			= "picodlp",
+	.driver_name		= "picodlp_panel",
+	.type			= OMAP_DISPLAY_TYPE_DPI,
+	.phy.dpi.data_lines	= 24,
+	.channel		= OMAP_DSS_CHANNEL_LCD2,
+	.platform_enable	= sdp4430_panel_enable_picodlp,
+	.platform_disable	= sdp4430_panel_disable_picodlp,
+	.data			= &sdp4430_picodlp_pdata,
+};
+
+static struct omap_dss_device *sdp4430_dss_devices[] = {
+	&sdp4430_lcd_device,
+	&sdp4430_lcd2_device,
+	&sdp4430_hdmi_device,
+	&sdp4430_picodlp_device,
+};
+
+static struct omap_dss_board_info sdp4430_dss_data = {
+	.num_devices	= ARRAY_SIZE(sdp4430_dss_devices),
+	.devices	= sdp4430_dss_devices,
+	.default_device	= &sdp4430_lcd_device,
+};
+
+void __init omap_4430sdp_display_init(void)
+{
+	int r;
+
+	/* Enable LCD2 by default (instead of Pico DLP) */
+	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+			"display_sel");
+	if (r)
+		pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+	sdp4430_picodlp_init();
+	omap_display_init(&sdp4430_dss_data);
+	/*
+	 * OMAP4460SDP/Blaze and OMAP4430 ES2.3 SDP/Blaze boards and
+	 * later have external pull up on the HDMI I2C lines
+	 */
+	if (cpu_is_omap446x() || omap_rev() > OMAP4430_REV_ES2_2)
+		omap_hdmi_init(OMAP_HDMI_SDA_SCL_EXTERNAL_PULLUP);
+	else
+		omap_hdmi_init(0);
+
+	omap_mux_init_gpio(HDMI_GPIO_LS_OE, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_CT_CP_HPD, OMAP_PIN_OUTPUT);
+	omap_mux_init_gpio(HDMI_GPIO_HPD, OMAP_PIN_INPUT_PULLDOWN);
+}
+
+void __init omap_4430sdp_display_init_of(void)
+{
+	int r;
+
+	/* Enable LCD2 by default (instead of Pico DLP) */
+	r = gpio_request_one(DISPLAY_SEL_GPIO, GPIOF_OUT_INIT_HIGH,
+			"display_sel");
+	if (r)
+		pr_err("%s: Could not get display_sel GPIO\n", __func__);
+
+	sdp4430_picodlp_init();
+	omap_display_init(&sdp4430_dss_data);
+}