Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (163 commits)
  omap: complete removal of machine_desc.io_pg_offst and .phys_io
  omap: UART: fix wakeup registers for OMAP24xx UART2
  omap: Fix spotty MMC voltages
  ASoC: OMAP4: MCPDM: Remove unnecessary include of plat/control.h
  serial: omap-serial: fix signess error
  OMAP3: DMA: Errata i541: sDMA FIFO draining does not finish
  omap: dma: Fix buffering disable bit setting for omap24xx
  omap: serial: Fix the boot-up crash/reboot without CONFIG_PM
  OMAP3: PM: fix scratchpad memory accesses for off-mode
  omap4: pandaboard: enable the ehci port on pandaboard
  omap4: pandaboard: Fix the init if CONFIG_MMC_OMAP_HS is not set
  omap4: pandaboard: remove unused hsmmc definition
  OMAP: McBSP: Remove null omap44xx ops comment
  OMAP: McBSP: Swap CLKS source definition
  OMAP: McBSP: Fix CLKR and FSR signal muxing
  OMAP2+: clock: reduce the amount of standard debugging while disabling unused clocks
  OMAP: control: move plat-omap/control.h to mach-omap2/control.h
  OMAP: split plat-omap/common.c
  OMAP: McBSP: implement functional clock switching via clock framework
  OMAP: McBSP: implement McBSP CLKR and FSR signal muxing via mach-omap2/mcbsp.c
  ...

Fixed up trivial conflicts in arch/arm/mach-omap2/
{board-zoom-peripherals.c,devices.c} as per Tony

1 files changed, 135 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/common.c b/arch/arm/mach-omap2/common.c
new file mode 100644
index 00000000000..778929f7e92
--- /dev/null
+++ b/arch/arm/mach-omap2/common.c
@@ -0,0 +1,135 @@
+/*
+ * linux/arch/arm/mach-omap2/common.c
+ *
+ * Code common to all OMAP2+ machines.
+ *
+ * Copyright (C) 2009 Texas Instruments
+ * Copyright (C) 2010 Nokia Corporation
+ * Tony Lindgren <tony@atomide.com>
+ * Added OMAP4 support - Santosh Shilimkar <santosh.shilimkar@ti.com>
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/clk.h>
+#include <linux/io.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/mux.h>
+
+#include <plat/clock.h>
+
+#include "sdrc.h"
+#include "control.h"
+
+/* Global address base setup code */
+
+#if defined(CONFIG_ARCH_OMAP2) || defined(CONFIG_ARCH_OMAP3)
+
+static void __init __omap2_set_globals(struct omap_globals *omap2_globals)
+{
+	omap2_set_globals_tap(omap2_globals);
+	omap2_set_globals_sdrc(omap2_globals);
+	omap2_set_globals_control(omap2_globals);
+	omap2_set_globals_prcm(omap2_globals);
+}
+
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2420)
+
+static struct omap_globals omap242x_globals = {
+	.class	= OMAP242X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x48014000),
+	.sdrc	= OMAP2420_SDRC_BASE,
+	.sms	= OMAP2420_SMS_BASE,
+	.ctrl	= OMAP242X_CTRL_BASE,
+	.prm	= OMAP2420_PRM_BASE,
+	.cm	= OMAP2420_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
+};
+
+void __init omap2_set_globals_242x(void)
+{
+	__omap2_set_globals(&omap242x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP2430)
+
+static struct omap_globals omap243x_globals = {
+	.class	= OMAP243X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4900a000),
+	.sdrc	= OMAP243X_SDRC_BASE,
+	.sms	= OMAP243X_SMS_BASE,
+	.ctrl	= OMAP243X_CTRL_BASE,
+	.prm	= OMAP2430_PRM_BASE,
+	.cm	= OMAP2430_CM_BASE,
+	.uart1_phys	= OMAP2_UART1_BASE,
+	.uart2_phys	= OMAP2_UART2_BASE,
+	.uart3_phys	= OMAP2_UART3_BASE,
+};
+
+void __init omap2_set_globals_243x(void)
+{
+	__omap2_set_globals(&omap243x_globals);
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP3)
+
+static struct omap_globals omap3_globals = {
+	.class	= OMAP343X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(0x4830A000),
+	.sdrc	= OMAP343X_SDRC_BASE,
+	.sms	= OMAP343X_SMS_BASE,
+	.ctrl	= OMAP343X_CTRL_BASE,
+	.prm	= OMAP3430_PRM_BASE,
+	.cm	= OMAP3430_CM_BASE,
+	.uart1_phys	= OMAP3_UART1_BASE,
+	.uart2_phys	= OMAP3_UART2_BASE,
+	.uart3_phys	= OMAP3_UART3_BASE,
+	.uart4_phys	= OMAP3_UART4_BASE,	/* Only on 3630 */
+};
+
+void __init omap2_set_globals_3xxx(void)
+{
+	__omap2_set_globals(&omap3_globals);
+}
+
+void __init omap3_map_io(void)
+{
+	omap2_set_globals_3xxx();
+	omap34xx_map_common_io();
+}
+#endif
+
+#if defined(CONFIG_ARCH_OMAP4)
+static struct omap_globals omap4_globals = {
+	.class	= OMAP443X_CLASS,
+	.tap	= OMAP2_L4_IO_ADDRESS(OMAP443X_SCM_BASE),
+	.ctrl	= OMAP443X_SCM_BASE,
+	.ctrl_pad	= OMAP443X_CTRL_BASE,
+	.prm	= OMAP4430_PRM_BASE,
+	.cm	= OMAP4430_CM_BASE,
+	.cm2	= OMAP4430_CM2_BASE,
+	.uart1_phys	= OMAP4_UART1_BASE,
+	.uart2_phys	= OMAP4_UART2_BASE,
+	.uart3_phys	= OMAP4_UART3_BASE,
+	.uart4_phys	= OMAP4_UART4_BASE,
+};
+
+void __init omap2_set_globals_443x(void)
+{
+	omap2_set_globals_tap(&omap4_globals);
+	omap2_set_globals_control(&omap4_globals);
+	omap2_set_globals_prcm(&omap4_globals);
+}
+#endif
+