Merge branch 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6

* 'omap-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap-2.6: (243 commits)
  omap2: Make OMAP2PLUS select OMAP_DM_TIMER
  OMAP4: hwmod data: Fix alignment and end of line in structurefields
  OMAP4: hwmod data: Move the DMA structures
  OMAP4: hwmod data: Move the smartreflex structures
  OMAP4: hwmod data: Fix missing SIDLE_SMART_WKUP in smartreflexsysc
  arm: omap: tusb6010: add name for MUSB IRQ
  arm: omap: craneboard: Add USB EHCI support
  omap2+: Initialize serial port for dynamic remuxing for n8x0
  omap2+: Add struct omap_board_data and use it for platform level serial init
  omap2+: Allow hwmod state changes to mux pads based on the state changes
  omap2+: Add support for hwmod specific muxing of devices
  omap2+: Add omap_mux_get_by_name
  OMAP2: PM: fix compile error when !CONFIG_SUSPEND
  MAINTAINERS: OMAP: hwmod: update hwmod code, data maintainership
  OMAP4: Smartreflex framework extensions
  OMAP4: hwmod: Add inital data for smartreflex modules.
  OMAP4: PM: Program correct init voltages for scalable VDDs
  OMAP4: Adding voltage driver support
  OMAP4: Register voltage PMIC parameters with the voltage layer
  OMAP3: PM: Program correct init voltages for VDD1 and VDD2
  ...

Fix up trivial conflict in arch/arm/plat-omap/Kconfig

1 files changed, 151 insertions, 0 deletions

diff --git a/arch/arm/mach-omap2/board-zoom.c b/arch/arm/mach-omap2/board-zoom.c
new file mode 100644
index 00000000000..e041c537ea3
--- /dev/null
+++ b/arch/arm/mach-omap2/board-zoom.c
@@ -0,0 +1,151 @@
+/*
+ * Copyright (C) 2009-2010 Texas Instruments Inc.
+ * Mikkel Christensen <mlc@ti.com>
+ * Felipe Balbi <balbi@ti.com>
+ *
+ * Modified from mach-omap2/board-ldp.c
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 as
+ * published by the Free Software Foundation.
+ */
+
+#include <linux/kernel.h>
+#include <linux/init.h>
+#include <linux/platform_device.h>
+#include <linux/input.h>
+#include <linux/gpio.h>
+#include <linux/i2c/twl.h>
+
+#include <asm/mach-types.h>
+#include <asm/mach/arch.h>
+
+#include <plat/common.h>
+#include <plat/board.h>
+#include <plat/usb.h>
+
+#include <mach/board-zoom.h>
+
+#include "board-flash.h"
+#include "mux.h"
+#include "sdram-micron-mt46h32m32lf-6.h"
+#include "sdram-hynix-h8mbx00u0mer-0em.h"
+
+#define ZOOM3_EHCI_RESET_GPIO		64
+
+static void __init omap_zoom_init_irq(void)
+{
+	omap2_init_common_infrastructure();
+	if (machine_is_omap_zoom2())
+		omap2_init_common_devices(mt46h32m32lf6_sdrc_params,
+					  mt46h32m32lf6_sdrc_params);
+	else if (machine_is_omap_zoom3())
+		omap2_init_common_devices(h8mbx00u0mer0em_sdrc_params,
+					  h8mbx00u0mer0em_sdrc_params);
+
+	omap_init_irq();
+}
+
+#ifdef CONFIG_OMAP_MUX
+static struct omap_board_mux board_mux[] __initdata = {
+	/* WLAN IRQ - GPIO 162 */
+	OMAP3_MUX(MCBSP1_CLKX, OMAP_MUX_MODE4 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN POWER ENABLE - GPIO 101 */
+	OMAP3_MUX(CAM_D2, OMAP_MUX_MODE4 | OMAP_PIN_OUTPUT),
+	/* WLAN SDIO: MMC3 CMD */
+	OMAP3_MUX(MCSPI1_CS1, OMAP_MUX_MODE3 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 CLK */
+	OMAP3_MUX(ETK_CLK, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	/* WLAN SDIO: MMC3 DAT[0-3] */
+	OMAP3_MUX(ETK_D3, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D4, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D5, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	OMAP3_MUX(ETK_D6, OMAP_MUX_MODE2 | OMAP_PIN_INPUT_PULLUP),
+	{ .reg_offset = OMAP_MUX_TERMINATOR },
+};
+#endif
+
+static struct mtd_partition zoom_nand_partitions[] = {
+	/* All the partition sizes are listed in terms of NAND block size */
+	{
+		.name		= "X-Loader-NAND",
+		.offset		= 0,
+		.size		= 4 * (64 * 2048),	/* 512KB, 0x80000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "U-Boot-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x80000 */
+		.size		= 10 * (64 * 2048),	/* 1.25MB, 0x140000 */
+		.mask_flags	= MTD_WRITEABLE,	/* force read-only */
+	},
+	{
+		.name		= "Boot Env-NAND",
+		.offset		= MTDPART_OFS_APPEND,   /* Offset = 0x1c0000 */
+		.size		= 2 * (64 * 2048),	/* 256KB, 0x40000 */
+	},
+	{
+		.name		= "Kernel-NAND",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x0200000*/
+		.size		= 240 * (64 * 2048),	/* 30M, 0x1E00000 */
+	},
+	{
+		.name		= "system",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x2000000 */
+		.size		= 3328 * (64 * 2048),	/* 416M, 0x1A000000 */
+	},
+	{
+		.name		= "userdata",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1C000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+	{
+		.name		= "cache",
+		.offset		= MTDPART_OFS_APPEND,	/* Offset = 0x1E000000*/
+		.size		= 256 * (64 * 2048),	/* 32M, 0x2000000 */
+	},
+};
+
+static const struct ehci_hcd_omap_platform_data ehci_pdata __initconst = {
+	.port_mode[0]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.port_mode[1]		= EHCI_HCD_OMAP_MODE_PHY,
+	.port_mode[2]		= EHCI_HCD_OMAP_MODE_UNKNOWN,
+	.phy_reset		= true,
+	.reset_gpio_port[0]	= -EINVAL,
+	.reset_gpio_port[1]	= ZOOM3_EHCI_RESET_GPIO,
+	.reset_gpio_port[2]	= -EINVAL,
+};
+
+static void __init omap_zoom_init(void)
+{
+	if (machine_is_omap_zoom2()) {
+		omap3_mux_init(board_mux, OMAP_PACKAGE_CBB);
+	} else if (machine_is_omap_zoom3()) {
+		omap3_mux_init(board_mux, OMAP_PACKAGE_CBP);
+		omap_mux_init_gpio(ZOOM3_EHCI_RESET_GPIO, OMAP_PIN_OUTPUT);
+		usb_ehci_init(&ehci_pdata);
+	}
+
+	board_nand_init(zoom_nand_partitions,
+			ARRAY_SIZE(zoom_nand_partitions), ZOOM_NAND_CS);
+	zoom_debugboard_init();
+	zoom_peripherals_init();
+}
+
+MACHINE_START(OMAP_ZOOM2, "OMAP Zoom2 board")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_zoom_init_irq,
+	.init_machine	= omap_zoom_init,
+	.timer		= &omap_timer,
+MACHINE_END
+
+MACHINE_START(OMAP_ZOOM3, "OMAP Zoom3 board")
+	.boot_params	= 0x80000100,
+	.map_io		= omap3_map_io,
+	.reserve	= omap_reserve,
+	.init_irq	= omap_zoom_init_irq,
+	.init_machine	= omap_zoom_init,
+	.timer		= &omap_timer,
+MACHINE_END